High Fidelity Cables CT-1designed by Rick Schultz


In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
I used to own CT-1 RCA and thought it was very good. Ended up with Teo liquid STD mkII.
Interested in auditioning some new speaker cables.
Some brands which look appealing is MG-audio PlanusIII or their new silver model,Sablon,Ocellia and of course HF.
I`m particularity interested in the MG. Anyone compared MG to HF? Or know of a good cable suitable for high efficiency speakers 114db? Will only be needing for frequencies 270Hz and above as the rest is taken care of and adjustable.
Any opinions would be much appreciated.
Petieboy your TEO is an XLR and High Fidelity are not doing an XLR yet. You need to be clear on that in your other posts. It's an apples to oranges comparison depending on the equipment.

The CT-1 is good, but cannot be compared to the CT-1E in a good system. It is vastly better IMO, and more in line price wise with what you are using.

I have experience with various ribbon speaker cable configurations. They are good but seem to roll the high end off. If you want them for 280Hz and up then perhaps the MG stuff will not be suitable.
It has been some time since I have heard the Teo cables, but frankly after that listening, I lost interest. They were no rivals for the Exemplar Silver Portals and the Exemplars lost out to the HFC Enhanced, which in turn lost to the HFC Ultimates. The only liabilities of the HFC Ultimates that I see, is their expense and especially the long time it takes for them to reach their best-weeks not days. And they really don't like to be moved either.
What I really like about my CT-1 Ultimates so far is that they are REALLY fast and miss NOTHING, yet retain excellent musicality. IF it was recorded on the CD, you will hear it through these cables. The realism of the music is also very impressive. As they continue to break-in, the micro dynamics continue to reveal themselves, with nothing sounding forced or constrained in any way. Bass is also starting to get a bit deeper and fuller, with no boominess whatsoever.
Fplanner2000....i have a pair of the CT-1U interconnects coming in a day or so to replace the CT-1Es i currently have..can't wait.i tried them before but the difference in my system between the 'U' and the 'E' was not that great. Rick thinks there was an impedence issue with the 'U' cable at that time and wants me to try another.i can't wait..stay tuned...