Specific needs for a new preamp...

Current Rowland Capri may also match your reqs. Fully differentially balanced. Output impedance of 80Ohms balanced. Remote control. Cost approx $2500 new in black livery. Optional phono stage card costs $350. I have commented abundantly on this pre on other threads. The device requires well over 500 hrs to break in. . . assume 3 or more months of significant use before it stabilizes.

There are two very good and reasonably priced preamps that will fill your requirements. The first, and in my opinion slightly better of the two is the Aesthetix Calypso. The Calypso is a tubed preamp that requires (for best performance) for you to upgrade the tubes to NOS tubes upon receipt. You should be able to find these new discounted to your price range and used for below your price range (used with good NOS tubes included). There is an upgraded SE Calypso coming out, so this is why you should be able to get the Calypso discounted new to your price.

The other preamp is the Capri as Guido referenced above. New you can secure these for under $3K without phono and used for just under $2K with or without phono.

I believe (just checked my Calypso manual, but it does not specifcy this), but I believe it is 100 ohm output impedence and does incorporate coupling capacitors to protect against dc leakage. Remote control is basically a full function remote with balance, input, volume, mute, etc. . .

If you need the phono card, the Capri is a better choice. You can add one to a new or used Capri direct from JRDG for about $500 and I understand it is a pretty good phono card. The remote is more basic with the Capri, volume, balance, mute, input (no power switch anywhere on the capri, if you want to turn it off you have to unplug it).

Be forwarned, the Calypso is a huge preamp and the Capri is a tiny preamp. Doubtful that has any impact, but thought I would mention it anyway.

Ckoffend, lack of on/off switch on Capri is an urban legend, probably started on review of Capri/102 on AUDIOENZ. Capri has a regular on/off toggle switch on the backplate.

Yep, the on/off switch is there. However, if I might nit pick I'm curious why:

1. When engaging the balance control on the remote the display does not show the tracking (if only temporarily).

2. Why you cannot switch phase via remote.

If I'm missing something here let me know, but these features would be nice.

Hi Clio, you make very good points. The lack of phase
inversion on Capri remote is a little annoying. . . and so is any lack of balance tracking on the display. The lack of phase inversion toggle on the remote has historical origins. . . Capri, being an 'entry level' product, has inherited a minimalistic remote created in 1994, when phase inversion was not yet popular. I believe the new Continuum has a new remote with phase control.