2. amps-preamps
  3. 1226287550

low output MC phono preamp for Audio Research pre

I have auditioned and am considering trying an Audio Research sp16 pre-amp in my system.

The one snag is that I use a low output moving coil cartridge, a Denon DL103R in my system and need an affordable phono pre-amp solution in that the phono pre-amp built into the sp16 does not provide sufficient gain.

One possibility that my dealer is investigating is if AR can do a step-up tweak to the sp16.

If that does not work out, an external phono preamp that matches well to the Denon DL103R is the other solution.

Any suggestions on which phono pre-amps offer good sound at reasonable price and can work with the DL103R and an Audio Research sp16?

Does Audio Research provide a phono pre-amp that works well with low output MC cartridges? I would probably be content sticking with a pure ARC solution if I can find one.

Thanks.
128x128mapman
hansk46's avatar
hansk46
122 posts
 
Hello , I 'm using a Dynavector Te Kaitora cartridge with the ARC PH 5 , not enough gain , so I built in a stepup xformer of exellent quality , Jensen ( ARC have used them in their REF phono).The result is super.Perhaps if possible you can built in this xformers in your SP16.
Greetings from the Netherlands Hans
mapman's avatar
mapman OP
22,342 posts
 
The latest from my dealer is that it looks like I would need to add an outboard device to the sp-16 for the Denon DL103R.

He has access to a second hand Electrocompaniet step-up device of some sort for not too much that he thinks could work well. I'll most likely be trying that out with his sp-17 in his shop shortly.

If that doesn't pan out, I see several options from this thread that look like it could work, so thanks for the info.
mapman's avatar
mapman OP
22,342 posts
 
Here's an update.

I'm running the new Audio Research sp-16 pre with a separate Electrocompaniet mc-2 step up pre that I acquired second hand for not much from my dealer.

I've only listened to a few lps so far but this new setup is working well and sounding great so far... a clear step up from my Carver c-6 with built in phono prior.

Phono level closely matches other input levels and there is plenty of gain and no problems with noise levels as long as the Electrocompaniet is not located in close proximity to external power supplies.
More to discover