Which Digital processor/equalizer ?

Eldartford wrote:
"Kr4...Although the equalization is done by a 32 bit floating point DSP module in the Behringer 2496, the unit includes excellent A/D and D/A converters, so can be used just fine with analog signals."
If you say so. I have no experience with them and was merely pointing out what I have heard. Your opinion is equally valid.

""Transparency" is a subjective thing. One should judge for themselves."
Agreed.

"One model he was selling for something like $50, but there were few sales. He jacked the price up to $200, and now they are selling well!"
Does this refer to the Behringers? ;-)

Kal

"Acoustat6".... I use a rive test cd2 and an SPL meter to arrive at this conclusion. After talking to Rives today I realise an equalizer may not help matters. I will still have the suckout in this region no matter how much gain I increase. Rives explained the stress on the amp and the speakers by trying to fix the suckout by increasing gain. Since I can't move my speakers too much I believe a good subwoofer placed properly should alleviate the bass problem and further optimize a good system

Kr4...Well yes. It probably would apply to the Behringer DEQ2496. Jack the price up to at least $1500, and audiophiles might give the thing a try :-)

Snook2....I heard that Rives is coming out with a new PARC model that will boost as well as cut (like the Behringer).
IMHO, and based on hands-on experience, your 8 dB problem should be easily foxed. Don't forget that the correction could be limited to 4 dB boost by cutting gain over the rest of the range.

By all accounts the PARC is an excellent item. My point is that while the PARC would set you back a few thousand bucks the Behringer would cost about a tenth as much. It would be a good way to find out if the suckout is really impossible to fix, as Rives has told you. Furthermore, the RTA of the Behringer will diagnose your problem easier and better than the SPL meter and Rives CD, which I also have used.