Most beneficial change .


I am seeking opinions about what to change first , my speakers or my amplification .

I have a Primaluna Prologue 2 integrated feeding Reference 3a Decapo i speakers from a Granite Audio 657 CDP using the tubed side most of the time . I have rolled the input tubes on the integrated to warm things up some which helped nicely . The system is in a small 10'X11' room on the diagonal with some room treatments . The room is carpeted and my chair is overstuffed leather with a matching foot stool .

I get good tone , extension , details , resolution and PRaT but it is kind of boring ! It all sounds pretty good but I don't want to tap my toes ,bob my head or play the air guitar ! I can listen for long periods of time with ease but just don't want to . Easy to fall asleep ! I guess that I would like to increase the dynamics and musicality . I prefer tubes .

Suggestions ?

Thank you for your input .
saki70
Jylee, what is your evidence that tube amps "add" additional 2nd and 3rd harmonics?

I have heard that tube amps emphasize even order harmonics and that solid state amps emphasize odd order harmonics. I've not heard that either embellishes the music by creating them where they are absent from a recording. It may be true, I just have not heard it put that way and I'm curious as to the source.

Where is Ralph when you need him?
One of the few useful and credible measurements published on the web is Stereophile. Here is a random example of a tube amplifier and a solid state amplifier.

tube amp

Take a look at figure 10. It's a graph of response generated by the amp when the input signal is 50Hz pure sine wave. The vertical axis is normalized to the amplitude of fundamental signal at 50Hz. The 2nd harmonics of 100Hz is seen at -40dB of fundamental, and the 3rd harmonics of 150Hz at -60dB of fundamental.

solid state amp

The response plot of the same signal is shown for a random solid state amp in figure 7. There is almost no 2nd harmonics, and 3rd harmonics is at -90dB of the fundamental.

The relative levels of those harmonics may be low enough, but they are not present in the input signal of pure sine wave, and they are the by product. I've picked random samples, but in general tube amps tend to generate more harmonics, and solid state amps tend to generate less. There are exceptions of course.
In the two test samples, it appears the tube amp adds predominantly second or even order harmonic and the solid state amp adds odd order harmonic (at a comparatively lower level (amplitude?)). It may be worth noting that the authors complained of significant hum in the tube amps tested, which could affect the output, but I'm ready to accept that both tube and solid state amps add harmonics to the source material.

The tests were performed on a 50khz pure sine wave. I am interested in seeing the results of similar test feeding the complex waves of a real instrument, say the strike of an "a" on the piano. Is that test data available comparing a tube amp to a solid state amp?
Wanted to give an update here.

I took the advise of tube suggestions . I had forgotten that this was one of reasons for the Primaluna choice !

I have tried some EL34's . Very nice , I see what you meant Trelja . They do make the mids more pronounced and interesting . I can see the fascination with these tubes !
These will do me for now .

Thanks to all .