Buy tubes from Audio Research or not

Taters check this description with pictures!!
This is from The Tube Store SED Winged "C" Tubes page.

http://mycollins.net/audio/artube1.html

I own the VT100mk1 and there is NO individual bias setting on each tube, you can only ajust the whole channel at one and that is why matched tubes are very important.
My dealer said that ARC keeps a data base of each amps bias settings when it leaves the factory. When you order tubes you need to give the serial # of the amp, and they sell you tubes that are marched close to your amp and you don't really need to worry about bias settings when you put in tubes. ARC will mark each tube to tell which socket it goes in. IS THIS TRUE, CAN ANYONE THAT HAS REALLY DONE THIS VERIFY? thanks in advance.

There is a reason ARC charge as much for the tubes as they do - they measure their tubes, burn them in inhouse for 48h, measure them again - and then throw away those that up to specs. As much as 30% tubes gets rejected this way. No other independent tube supplier I'm aware of does offer this kind of service.

"There is a reason ARC charge as much for the tubes as they do - they measure their tubes, burn them in inhouse for 48h, measure them again - and then throw away those that up to specs. As much as 30% tubes gets rejected this way. No other independent tube supplier I'm aware of does offer this kind of service."

I'll be needed tubes for an ARC sp16 pre-amp at some point.

My impression is that the QC service ARC provides as described is worth a premium.

Anybody know how much of a premium to expect to pay for tubes from ARC versus other likely internet sellers?

Unless I am mistaken, Upscale Audio also burns in their output tubes. Not sure what their rejection rate is. However, they've given up on re-tubing the ARC VT-100.