Wow! Thanks everyone for the comments, and it is obvious to me that I have lots to learn! Some of what you are saying I understand, some things I am not entirely clear on.
Looks like opinions pretty much cover all the options. I suspected as much really, but it is still somewhat overwhelming. However, it does seem that there is more of a preference for tubes in the power amp for the fullest 'effect'.
I hadn't thought much about tubes in the source components, DACs, or 'buffers'. I'm not convinced I want to go that route yet. But it is early on still and things may change.
Honestly, my idea of tubes in the preamp was driven mainly by it's perceived simplicity in connections. Seems like I could simply add a tube preamp to the system and connect it to my JC2 preamp via the bypass input, which would send the signal passed the JC2 untouched directly to the amp. I wouldnt need to switch around any speaker cables since I would have only the single SS amp. Any sources I wanted to hear via tubes could be connected to the tube preamp, and any sources I wanted to hear via SS could be connected to the JC2. However, in practice, I suspect I would still be switching the source cables back and forth as I would probably experiment with any single source with both preamps.
If I go the route of the tube amp instead, I am now thinking about components such as the Cayin integrated amps (A88T, A100T) which could be used as a standalone all-tube preamp/amp, while at the same time it is able to be used solely as a power amp using the preamp inputs it has that bypass it's preamp section. So I would have an all-tube integrated, with an option to be used as a tube power amp only. Is this a norm for tube integrated amps? Are there others like this?
So I have to ask a few more questions about the method of connection if I use a tube amp. The JC2 preamp has 4 pairs of outputs (balanced, unbalanced, etc) that are all active simultaneously. So could I connect the JC2 out to the SS amp via one output and to the tube (integrated) power amp via another output? I would have to switch speaker connections between the 2 amps dependent on which I wanted to use? How would this work out?
Yes, I deliberately left out the part about the speakers, although I am aware that it is a very important part of the equation. The reason for this is that I plan to upgrade speakers soon. Right now, I am using 20+ year old Vandersteen 2Ce speakers. And I am still unsure of which speakers I will be getting. I'm not sure whether to even bring it up here as I dont want this to turn into a discussion of speakers. But I realize it is important, so some of the contenders for new speakers would be: Dali Helicon 800, Monitor Audio PL300, Focal 1037Be, B&W 803D, Vandersteen Quatros or Model 5.
If I go the route of the tube amp, could someone explain in a bit more simplistic terms what I need to look for in order for it to match with the JC2 preamp and whatever speakers I eventually choose?
Looks like opinions pretty much cover all the options. I suspected as much really, but it is still somewhat overwhelming. However, it does seem that there is more of a preference for tubes in the power amp for the fullest 'effect'.
I hadn't thought much about tubes in the source components, DACs, or 'buffers'. I'm not convinced I want to go that route yet. But it is early on still and things may change.
Honestly, my idea of tubes in the preamp was driven mainly by it's perceived simplicity in connections. Seems like I could simply add a tube preamp to the system and connect it to my JC2 preamp via the bypass input, which would send the signal passed the JC2 untouched directly to the amp. I wouldnt need to switch around any speaker cables since I would have only the single SS amp. Any sources I wanted to hear via tubes could be connected to the tube preamp, and any sources I wanted to hear via SS could be connected to the JC2. However, in practice, I suspect I would still be switching the source cables back and forth as I would probably experiment with any single source with both preamps.
If I go the route of the tube amp instead, I am now thinking about components such as the Cayin integrated amps (A88T, A100T) which could be used as a standalone all-tube preamp/amp, while at the same time it is able to be used solely as a power amp using the preamp inputs it has that bypass it's preamp section. So I would have an all-tube integrated, with an option to be used as a tube power amp only. Is this a norm for tube integrated amps? Are there others like this?
So I have to ask a few more questions about the method of connection if I use a tube amp. The JC2 preamp has 4 pairs of outputs (balanced, unbalanced, etc) that are all active simultaneously. So could I connect the JC2 out to the SS amp via one output and to the tube (integrated) power amp via another output? I would have to switch speaker connections between the 2 amps dependent on which I wanted to use? How would this work out?
Yes, I deliberately left out the part about the speakers, although I am aware that it is a very important part of the equation. The reason for this is that I plan to upgrade speakers soon. Right now, I am using 20+ year old Vandersteen 2Ce speakers. And I am still unsure of which speakers I will be getting. I'm not sure whether to even bring it up here as I dont want this to turn into a discussion of speakers. But I realize it is important, so some of the contenders for new speakers would be: Dali Helicon 800, Monitor Audio PL300, Focal 1037Be, B&W 803D, Vandersteen Quatros or Model 5.
If I go the route of the tube amp, could someone explain in a bit more simplistic terms what I need to look for in order for it to match with the JC2 preamp and whatever speakers I eventually choose?