? Tube Replacement Question ?

Kit,

With my sp16, I hear a tad more hiss/background noise only in the phono stage at higher volumes with nothing playing using the Groove Tube Gold 12AX7s compared to the original "low noise" tubes that came in the unit for ARC. Not an issue for me but for those who cannot handle any extra noise at all in their phono stage ever, it might be.

You might want to consider using tube dampers in the phono stage, at the very least. These tubes are more susceptible to micro-phonics due to the increased gain in the phono stage. When you are using the phono stage you are actually using the phono stage and the high level stage together to get the necessary gain. I use the dampers in both the high-level and the phono stages with excellent results. The ARC tube dampers work very well and are inexpensive.

Thank you, everyone, for your suggestions. This will allow me to weigh the pros & cons of my various options & to make an informed decision. Thanks again.

A note regarding tube dampers.

The tubes in my SP16 came with removable dampers.

I put these on teh new tubes when I replaced them.

The gal at ARC told me that the dampers were not removable and reusable with some older production units. ie they tended to adhere to the tubes over time.

Mapman the new rubber "O" ring dampers are removable and reusable, just don't cover the plate of the tube. Move the ring so it's above the plate structure. The older clear dampers used to melt into the tube.