Qns on Ayre AX-7e Int Amp

All evolution models have the word "evolution" written in gold lettering under the Ayre logo on the front panel. That is the foolproof way of knowing which model you have.

If you are still uncertain, the first letter of the serial number indicates the production version of the amp, so if you call Ayre and give them your serial number, they can confirm to you what you have.

Wyred : Unfortunately, Ayre Acoustics does not list an email address on their web site. They prefer to use the phone for customer service. I suggest you call them at 1.303.442.7300 x223. See

http://www.ayre.com/contact.htm

If you cannot call Ayre Acoustics, you could mail them and ask your question. I am a little confused since both Countingbackwards and I have explained how to identify an "evolution" model of the Ayre AX-7e. In my opinion, if you are going to buy the AX-7 amp, you should buy the "evolution" AX-7e model since it is much better sounding than the older AX-7 version.

As noted above, all evolution AX-7e models have the word "evolution" written in gold lettering under the Ayre logo on the front front panel. I checked my AX-7e and it does have the words "evolution " on the left front side of the amplifier as described above by Countingbackwards.

Wyred,
If you believe that the amplifier of interest is an Ayre AX-7E but it does not show the faint gold "Evolution" label on the front panel, then it is still possible that your unit is an "E" version that has been upgraded from an AX-7. To its credit, Ayre Acoustics offered this upgrade at nominal costs to existing owners. As a result, there are likely quite a few of these units around, and they should be equivalent to the units shipped originally as AX-7E's.

As stated above, a call to Ayre tech support with the serial number of your unit will give you a definitive answer. Optionally contact an Ayre distributor in your country and he might be able to assist you.

Wyred: As Sandstone suggested above you could contact the Ayre distributor in Singapore. As Sandstone posted above, it is possible the unit you are looking at was converted from a AX-7 to a AX-7e model. This Distributor should be able to answer your question on the AX-7 or the AX-7e amplifier. If not, ask them to call Ayre in the United States.

For info on Ayre Singaporian Dealers or for information on where to audition Ayre products in Singapore please contact:

Norman Audio Pte. Ltd.
Ivan Cheng
No. 1 , Coleman Street
#04-45 The Adelphi
Singapore
Tel: +65.6339.8286
Fax: +65.6339.7057
info@normanaudio.com
www.normanaudio.com

I can't emphasis the fact enough that all Ayre equipment is balanced and should be used with the XLR jacks.