2. amps-preamps
  3. 1345702743

NAD 2600 and thumping noise

Okay, I just got a nice deal on an NAD 2600. However, when I turn it on and off there is a fairly loud THUMP. Even if the volume is turned down and the inputs are removed, it is still there. I know this isn't much to go on, but any ideas? Is this a matter of cleaning this baby up? Or have I bought a dying beast? Or something in between?

Many thanks! Aaron
aewhistory
slikric3000
638 posts
 
That's normal with budget gear, no soft start of stop.
marakanetz's avatar
marakanetz
5,473 posts
 
...and it's good for speakers too:-)
ths364
181 posts
 
If you can turn the speakers off before powering up or down, do so.
If the amp has a headphone out that shuts the speakers off- you can insert cheap headphones or a dummy plug (just buy a 1/4 in stereo phone plug from Radio Shack). I had the same problem with aN NAD 71xx series receiver, and thats what I used to do.
jmcgrogan2's avatar
jmcgrogan2
6,346 posts
 
Check with NAD, on an amp that old it may be that some caps have gone bad and need replacing.
bojack
655 posts
 
Not normal for this amp...the relays are shot and need to be replaced.
More to discover