Taralabs cables

what is the

cryogenic treatment

process









I am not a metallurgist, I am an enthusiast having fun with cables. This is the best explanation that I've been told. In layman's terms it would be the opposite of heat treating. The process alters the molecular structure of the metals/wires/cables and allows the current/signal to flow more smoothly, evenly with less resistance. Resulting in some amazing changes in high end electronics.

What is the process?
The total process takes 72 hours, you have a 24 hour cooling down period dropping the temperature gradually until finally reaching -320 degrees. The temperature is held there for 24 hours, then starts the 24 hour period of bringing it back to room temperature. The 24 hour cooling/warming period is to reduce damage from expansion/contract.

What is the end result?
The most important factor or variable would be the quality of your piece of electronics, the higher the quality the greater the change. In audio you will first hear a noticeable difference in the bass, it will be lower and more pronounced. Then you will realize that your noticing things you hadn't heard before. The mids and highs are more vivid, you'll notice better clarity and imaging. The overall sound stage is larger, more defined with greater depth. In a video application the differences are more subtle. I'm finding that the purists notice the most difference. A 60Hz TV will show little to no difference. A 120Hz TV will show a difference but might not be noticed by the average enthusiast. But a 240Hz TV or high end projector will show a definite change. Sharper image, smoother motion, brighter colors, greater depth, and in a 3D application you become part of the movie. Again, the higher the quality, the greater the change.

Hi Gslone, I am sorry, I just seen your post,you asked about the Tara Lab's "The One" speaker cable's, first off, their is no such thing as ISM on board, "The One" speaker cable's, and their is no such thing as natual fiber core in these speaker cable's, So I will be of some help to you, and if you have question's, I will accomidate them as well, here is what the answer is to your 2-10-15 post- Pr. The One CX 8ft/2.4m



Extremely transparent, detailed, open and revealing; spacious soundstage with well defined and vivid images; fine resolution of detail and ambient information. The ISM The One™ has 8+ gauge conductor runs; SA-OF8N® copper; each channel comprised of 70 RSC® Gen 2 conductors in Aero-PE® dielectric; positive/negative run for each channel; positive/negative runs are 35 conductors each, helixed around Teflon® air-tubes™.
•BSM (with 1/4” Spades or Bananas)
•8+ gauge conductor runs.
•SA-OF8N® copper.
•Each channel comprised of 70 RSC® Gen 2 conductors in Aero-PE® dielectric.
•Positive/negative run for each channel
•Positive/negative runs are 35 conductors each helixed around Teflon air tubes
•Extremely transparent, detailed, open & revealing
•Spacious soundstage with well-defined and vivid images
•Fine resolution of detail & ambient images
•Extremely neutral & open

@audiolabyrinth. How are you

This is the new second from the top model interconnect Grandmaster Evolution, The Zero Evolution interconnect, Pr. The Zero Evolution w/HFX 1.0m/3.3ft

The new Zero Evolution is another remarkable breakthrough in cutting edge technology and design from TARA Labs. The Zero Evolution design supersedes the Zero Gold with a 75% increase in bandwidth, in addition to an incredible 2.5pf, resulting in a vanishingly low noise floor that creates the widest dynamic range possible. Our SAOF-8N 99.999999% inline polished conductors uses our new proprietary Liquid-film™ dielectric. The Zero Evolution also includes our new flexible air-tube technology and design. This results in a sound that reveals fine nuances of attack, sustain and delay, and is extremely revealing of subtle high-frequency detail. The listening experience is described as holographic and lifelike.
•Zero Evolution design supersedes the Zero Gold with a 75% increase in bandwidth
•RCA torque-lock / XLR
•Anti-corrosion coated SAOF-8N copper shield
•RSC Gen 2 conductors
•Teflon and Aero-PE filaments ensure complete air dielectric construction
•Controlled spacing of conductor to conductor geometry produces record low interconnect capacitance of 2.5pf (pico-farads)
•Controlled geometry for stable electrical characteristics
•Extremely revealing with subtle high-frequency detail
•All new flexible air-tube technology and design
•SAOF-8N inline polished conductors with TARA Labs proprietary Liquid-film™ dielectric
•Break through design and technology delivers an incredible listening experience
•Extremely low noise floor creates the widest dynamic range that reveals extremely fine nuances of fast attack, sustain and decay

Hi Calvinj, not so good my friend, please give me a phone call soon.