2. amps-preamps
  3. 1359508108

shipping boxes for heavy electronics

greetings, first post here on audiogon forum. I have a heavy parasound amp that is about 90 lbs, and I do not have original shipping boxes. I took it to fedex and they said they would have boxes for the dimensions of the amp, but not for that weight, as their heaviest box can withstand 60 lbs. I have been looking on the internet that would have a rating of 80+ lbs, but I simply cannot locate one.

Can someone make a suggestion on where to acquire such heavy duty shipping box for electronics? any suggestion would be greatly appreciated. amp dimension is 19"x8"x20".

Thank you.
woody88
markpao
519 posts
 
Elizabeth nailed it to the T. I have a lot of packing experience and will say that if you follow her advice you should be fine. The only thing I would add id to put the same dense foam in BOTH boxes.
Buying a Parasound box works too but I find that manufacturers charge hefty for their boxes.I had to fork out $90.00 for an Audio Research box! They are double boxes I know but $90.00 for carboard!
markpao
519 posts
 
Rethinking my last post, that packing method will address the box with an 80 pound weight limit but you are better off strapping it to a pallet and using freight instead of ground. Your amp will survive ground unless it gets in the wrong hands and is dropped. Less of a chance dropping with freight.
vicdamone
850 posts
 
uline.com look up double ply corrugated boxes in the size required.
bdgregory
1,710 posts
 
Uhaul has moving boxes that are sturdy 2 ply corrugated, and if you double box, with sturdy styrofoam sheets (you can get at home depot) you may be able to fabricate a package. I would NOT ship a 90 lb amp this way unless I could find 2 double ply boxes that could nest inside each oter with a minimum of 2" hi density styrofoam around it, and use a lot of sturdy packing tape to seal it all up. I may also be inclined to insert some 1/4" plywood sheets on at least 2 opposing sides to give the corners more stiffness.
maplegrovemusic's avatar
maplegrovemusic
1,113 posts
 
A wood crate is the way to go .With the styrofoam insulation at home depot .sold in 4x8 sheets.Most delivery services are not going to try and lift something that heavy . They would use dollys or something to aid in lifting heavy weights .
More to discover