PMC vs. Salk Sound Speakers. Which is better?

As to why I would choose the Salk's, a number of things come into play. As Rja mentioned, the customizability of components and finishes is one reason. The fact that I am getting a well thought-of high end speaker at direct sale without a middle man (dealer) makes it much more a ffordable than comparable speakers. The type of bass system employed favors deep but tight bass in my room (two 8-inch woofers and 12 inch passive radiators per speaker) rather than a sealed box or ported speaker. The fact that my amplifier is 250 watts per channel and the sensitivity of the Salk's is 87db/watt( no inability to drive them here!). The driver choices are also a factor as the tweeter is a very highly respected ribbon (RAAL) and the midrange is perhaps one of the best in audio (Accuton ceramic).And Dennis Murphy's crossover simplicity appeals to me rather than a much more complicated pathway. Add to these factors that I heard the Salk's at a show and the sound spoke to me, and there you have it. The PMC could be better, I dont know, but due to the factors listed and the sound I heard, the choice of speakers was clear to me. Whenever someone asks "is this one or that one better?", it brings up a sticky issue. There will always be a better speaker than the one you or I have, but can you afford it and just how much better is it? Is a $100,000.00 dollar speaker ten times better than a $10,000.00 one? We all hear differently, have different ancillary components and different rooms, so my idea of better maybe be your idea of crap. Without having the two speakers in question available to do a side by side comparo in your home, with your equipment,I feel the question is moot.

With regards to the original question you must hear them yourself - getting others opinions is only really of value getting ideas about what you should listen to and perhaps the best way to audition them.

But I am sitting here shaking my head at the quality of parts Vaopr1 said are used in PMC speakers - electrolytics - my god - in a $14k speaker. My new speakers cost $15k and they use Duelund Cast Copper capacitors - at $14k you would expect something a bit better. And yes you can tell the difference - I have heard comparisons of speakers where the only difference was Mundorf Silver In Oil and Duelund VSF Copper - The Duelund murdered the Mundorfs - but electrolytics - the mind boggles.

I have heard PMC's although not the model mentioned - they were average to my ears. I haven't had the pleasure of hearing Salk speakers but I know people whose ears I trust that have and they are fairly impressed.

However if you are considering $14k I would have a look at plenty of other speakers as well as the PMC. In that price bracket I like the Rockport Mira 2.

Thanks
Bill

Okay...I'll come clean as to why I really started this thread. Too see how many fools would reply that would be stupid enough to blow $14K on a pair of PMC PB1i speakers that is currently the most over priced speaker on the market. A rip off. I respect Vapor1's input as a designer and I'm well aware of low, mid, and high grade conponents that go into a speaker's crossover network. Dennis Murphy, the brilliant engineer crossover designer for Salk, has written an article on the Salk Audio blog called "Crossovers 101". A great read. Salk speaker's are not only #1 in the U.S. as the best and highest quality speaker for their price but are #1 in the world as well. There is no way in hell there exists any other speaker company on the planet that can even come close to the quality of Salk for the money. The remarkable options and upgrades that Jim Salk offer's is over the top. You would have to spend well over $30K to get the woodwork and cabinet quality of the Salks. Peter Thomas of PMC is an Audio politician and attracts Audiophile customer's that live in the Audiophile Matrix. The type that picks a product based on all the Hype in the media and the mags. The PMC PB1i has a forty pound wood cabinet that is hollow due to the vertical transmission line tunnel inside with a large single folded piece of absorbing foam. It has one dinky crossover board with cheap parts for a three way speaker and four drivers which brings it up to 57 pounds. For $14,0000?. Fool's gold. Hell, if your going to spend that much, buy the top model from Salk or the Acoustic Zen Crescendo which you can pick up at a discount. The Salk and Zen will blow the PMC out the window. And good luck trying to connect a pair of standard 12mm locking banana connectors to the PMC. They won't fit. Too big. The PMC's will not accept banana plug's larger than 4mm. Their binding posts are crap.

OK. Good One. You fooled me.

Well, at least you confessed to being a prick, so there's something honest about you. Good for you: now you're honestly a prick.