PMC vs. Salk Sound Speakers. Which is better?

Audiozen, audiophiles also claim all kinds of advantages to: putting speaker wires on lifters; adding baubles to their racks to deal with "resonances"; 3' of power cable between the 30' of romex in their walls and their amps. Common knowledge, so to speak. Common knowledge with no basis in any kind of objective metric. It's common knowledge that Bigfoot is real too.

If you're here to praise Salk's stuff, fine. But spare the mumbo-jumbo about fuses turning an amp or preamp from blah into something positively amazing. This is a speaker forum after all.

A cult following does not define a good speaker. I used Bose as an example of that since their customer base is much larger, and probably as loyal, as Jim's. Bose's fan base proves that you don't have to make great sounding speakers if you have adequate marketing prowess. Salk's following proves that a good product will garner a long list of customers.

I got to agree with Vapor1 here and also Dodgealum. I don't post much here anymore because the questions never get answered but comes down to a lot of wienie wagging.

Parts do make a difference and they don't have to be laid out in a neat order. Look inside a TRL Dude preamp. Wires all over the place. Circuit boards can also go bad over time do to heat, not sure how much heat in speakers but in repairing old tube gear I see many circuit boards damaged beyond repair. I wonder why a $14K speaker uses cheap parts? More expensive resistors don't cost that much more or even better caps but I see so many high end manufacturers of components using cheap parts (resistors, caps, volume control). That is why most people are spending so much on having upgraded parts installed.

As far as the two speakers, I have heard both in different systems. Cannot say that I prefer either. I don't judge a speaker until I can hear it in my system with my gear. I know the sound of my system and room. Only then can I judge what I prefer. Too many times people hear something and say that they did not like the sound. Not sure how they come to that conclusion. For example in the past I heard Dodgealum's system. I brought over a preamp that I designed and I thought his system sounded completely different with my preamp. He has moved on to a different preamp since then and my preamp design is significantly better now also. I can tell you that most if not all of you have a preamp that does what my preamp does. The Salks won't sound murky or glassy. I have also heard manufacturers use components at shows that I wouldn't use with their speakers. I wonder all the time, do they think this sounds good? Why would they use that gear with those speakers? And last, the price of a component means nothing. It comes down to the sound in your system and what you prefer. And to me the only way to tell is to get them in your system.

Happy Listening.

I think Bigkidz hit the nail on the head. Whether you like PMC or Salk, it's possible to make either one sound good or bad by using ancillary equipment not suited to them. And it's just as possible for a $15,000.00 preamp and $25,000.00 amp to make a speaker sound bad (or good) as it is for a $1500.00 preamp and $2000.00 amp to make a speaker sound good or bad. Depends on the implementation of the components and if there's something about them that doesn't suit the speaker (or vice versa).One example: if you have an impedance mismatch between the output impedance of the preamp and the input impedance of the amp, then it's likely whatever speaker you are listening to them through isn't going to sound good. Interconects and speaker cables also provide plenty of opportunity to make or break how any speaker sounds. Either the Salk or the PMC (or any speaker) could sound very good in one system and sound like crap in another. Rooms and placement are another way to showcase your speakers or destroy what they're capable of. So when someone says this brand of speaker is great but that one is crap, what kind of system and room are they listening to them with/in?

Cmon Audiozen...your not going to stop there are you.I am sure Jim appreciates all your doing here for him???
I may dissagree with PMC pricing but they have good SQ.