Sure. Integration will depend on the tools you have but I have no doubt it can be achieved.
Revel Gem 2 only goes down to 75Hz ?
I am considering Gem 2 for front L/R. However i was stunned to see that their low freq resp rating is only 70 to 75Hz. My primary use is music (both 2.1 & 5.1)
I have a good sub woofer, but i it seems like a bad idea to cross-over at 80Hz when the speaker is only rated down to 75Hz. The usual rule of thumb is to cross-over at approx 2x the low freq rating (eg. 80Hz if speaker is rated down to 40Hz).
Anybody using Gem2 with a sub ?
I have a good sub woofer, but i it seems like a bad idea to cross-over at 80Hz when the speaker is only rated down to 75Hz. The usual rule of thumb is to cross-over at approx 2x the low freq rating (eg. 80Hz if speaker is rated down to 40Hz).
Anybody using Gem2 with a sub ?
- ...
- 5 posts total
- 5 posts total