2. speakers
  3. 1371197777

Hole in NS-1000M midrange driver

I just acquired a pair of these speakers in fair condition; all of the drivers look good except the right midrange driver. There is a small hole in the dome! It appears to be around 3mm in diameter. The image is rotated; the damage is actually on the middle bottom of the dome.

http://i.imgur.com/ZRwxoa1.jpg

Is there anything that can be done to salvage the driver? Am I right in assuming that the driver is unusable in it's current state? Do I have no choice but to pray for a replacement to pop up on eBay? I've read that these drivers were assembled as carefully matched pairs. Will there be a significant imbalance if I do end up buying a single replacement driver?

If I do happen upon a non-functional driver with an intact dome, is there any way to Frankenstein them together?

Any help would be greatly appreciated. Thank you!
sb61g2
pbnaudio's avatar
pbnaudio
1,613 posts
 
Better jump on this one before its gone

NS1000 Midrange unit

Since its dome is made from Beryllium handle and recycle the old one accordingly.

While your at it you may want to check into upgrading the crossovers too, heres a link to an option for this

Troels Gravesen NS 1000M Crossover upgrade

Best of luck

Peter
Ag insider logo xs@2x
drubin
3,274 posts
 
Am I right in assuming that the driver is unusable in it's current state?
Have you tried playing it? Might be acceptable.
Post removed 
mgattmch
569 posts
 
Remember, beryllium is very toxic, if you touch the metal dome, make sure you wash your hands very thoroughly afterwards. As far as I know the beryllium midrange and tweeters were not assembled/installed in matched pairs. After 33 years my Yamaha NS1000Ms still perform and look great.
More to discover