Why will no other turntable beat the EMT 927?


Having owned many good turntables in my audiophile life I am still wondering why not one of the modern designs of the last 20 years is able to beat the sound qualities of an EMT 927.
New designs may offer some advantages like multiple armboards, more than one motor or additional vibration measurements etc. but regarding the sound quality the EMT is unbeatable!
What is the real reason behind this as the machine is nearly 60 years old, including the pre-versions like the R-80?
thuchan
Tbg,
Tommy is right. Specific parts are not available without a 'donor' TT.
You may find This Thread amusing?

On the other hand.......new capacitors are all available....and Lewm has discovered that by Googling the transistor part Nos easily obtained from the Technical Manual on Vinyl Engine.......one can find replacements for all the transistors and ICs used in the TT-101 HERE

Life is too short to worry about the future.......?
My audio journey would be a lot poorer without the Victor TT-101 :-)
Dear Richardkrebs, thanks for sharing. Like the EMT 930 the SP10 were created with a different set of goals from the 927 by their designers. While you might tweak them you can't change their nature.
Lew,

I did dismiss turntables with lightweight platters, until I heard a Mitchell Cotter. The motor can provide the needed system inertia, though. By the way, the EMT 927 platter is fairly lightweight. It is around 12.5 lbs. not counting the mat, if my memory serves me.

According to Mark Kelly's math, 35 lbs. is the cutoff point for the weight of an idler type turntable, but I have never put it to the test.

The servo mechanism used in top Denons seems to have a leg up on the others I have heard, but my exposure is extremely limited.
Dover.

Thank you again for your interest in my upgrade, re the "woolly" comment, you are quite correct. Please refer to my web site where this phenomena is specifically discussed. It takes months for this trait to settle, whereupon it becomes superior to the original. See also the comments from Joe of Pass Labs, covering this topic.

Dkarmeli.

Thank you for the feedback. I have not heard a 927, but from the pictures it appears to be a superbly engineered machine.
Dear Dover, "From my listening experiences neither of these DD's would compete with the top Micro Seiki's that I have heard in the areas of musical flow and coherence."

You don't need top MS tables for that the basic RX-1500 is already superior to these tables in those areas. Then again Micro Seiki's track record speaks for itself.