2. analog
  3. 1366376739

Question on FR 66s

For some reason, search on FR 66s in agon did not turn up anything much. I recalled that recommended S2P distance is 296mm rather than 295mm and Stevenson geometry seems to work best. Is this correct? I already have FR 64s which works very nicely with Koetsu. In general, does FR 66s works well with the more modern cartridges, Lyra, Air Tight, Dynavector etc.
I am kind of curious to try it but not sure what to try it with. Beside those mentioned on my system page, I have Kiseki Blue, XV-1s and Miyajima Zero on hand currently.

Thanks for any suggestion.
suteetat
suteetat OP
435 posts
 
Halcro, thanks for your help. I am already doing No1 at the moment. My Feickert NextGen protractor does not have correction for overhang as far as I can tell. Just set P2S distance and choose geometry and that's about it.
A bit of a bummer as I chose to order SMARTracter rather than Uni-tracker (along with Arche headshell) just a few days ago. Oh well... a friend ordered Uni-tracter so at least I will have a chance to try it and see how that go.
lewm
13,492 posts
 
Dear Henry, I am a bit puzzled about a recommendation for a specific headshell offset angle to go along with the recommended P2S distance and overhang for the 64S. In the case of headshell offset angle, isn't one "stuck" with the built-in angle? In other words, I believe that both tonearms are S-shaped such that the orientation of the plug for the headshell pre-determines the offset angle. If that angle is not the above recommended 20.5 degrees, how do the other recommended parameters work? I am guessing that the built-in angle is 20.5 for the 64S, and there is no problem, but it would be good if you can confirm that. Anyway, I've got a UNI with the 64S template.
lewm
13,492 posts
 
Dear Henry, I've got my answer. No worries.
nandric's avatar
nandric
4,086 posts
 
Dear Thuchan, I will post to you the email address of my
uncle Boris.I am sure he will gladly exchange his Natalija
for your speakers provided he can use his 'Medvedev'
capacitors with your HF drivers. He will namely not part
from his Russian oil capacitors.

Regards,
suteetat OP
435 posts
 
Halcro, thanks again for your information. I will wait for SMARTracker to arrive before experimenting. I assume that once setting P2S to 231.5 and using UNIdin and align it to null point properly, offset angle and overhang would be adjusted to the new spec automatically, if I am reading your post correctly.

This is a lot of fun and please hijack the thread as you wish. FR66s, FR64s, I needs all the help I can get for both!
I also recently got the B-60 VTA adjustment replica for FR66s which is great. Now I will have to save up for another one for FR64s. However, I will need to find a new armboard as my Micro Seiki armboard for FR will not accomodate the larger diameter VTA on the fly module.
More to discover