$1,000 to spend on room treatment....


My new room 21*13*7 has very bad acoustic: flutter echo of hell (a solid 2 seconds of metallic echo for each clapping of hands), bass resonance and probably more that hides being the first 2 but that will become noticeable later on. I have a max of $1,000 to spend to treat it and already own 4 fiberglass panels 2*4 that I can use to treat mids and diffuse. What do you suggest - price when new to be consistent? There are some room kits that seem to fit the bill (www.primacoustic.com) but I need guidance on this. Tks.
beheme
Call Brian at sensiblesoundsolutions.com. Great way to get a personal approach, top quality treatment materials and more reasonable cost than most competitors.
You can see his work on my system page. Cheers,
Spencer
What about DIY? You should find some good info on this site. I am very satisfied with the room treatments that I have made.
Aside from the 7 ft high ceiling, you have a near ideal room size.

Before spending money on 'room treatments' per se, I would suggest the following:

o That your floor is covered with a thick carpet pad and a thick berber or pile type of carpet.

o Remove any hard reflective surfaces from the room, ie leather furniture, glass tables, picture frames, table and floor standing lamps, etc..

o Consider using overstuffed cloth-covered furniture, ottoman, etc., recessed or small floor-based lighting, draperies, etc..

o And most important is the speaker placement within the room.

Only then would consider proper room treatments. But hopefully at that point your room would no longer be a concern.

-IMO
If you have the interest or time I would recommend trying some DIY treatments first. There’s a lot of good information on the web - check out Audio Asylum’s Room Acoustics Forum, Rives Audio and Ethen Winer’s sites.

After doing research, I made a number of effective bass traps and absorbers for my dedicated listening room based on Owens Corning 703 and 705 rigid fiberglass products. With a few basic shop skills you can build custom panels that are attractive and work as well as, or better then, many commercial products.

Going this route is more effort, but you learn a lot about acoustics and save enough money to be able to treat your whole room instead of just part of it. I have 2'x8’ bass traps in all four corners, absorbers at the first reflection points and enough material left over to try several other options. You can also test some options just by placing or stacking the rigid fiberglass in corners or reflection points. If you can't find a local source, there are several online suppliers, including the sensiblesound site mentioned above.