I will look for the nanual. I have the L and R pre-amp output (not stereo, the SMS-1 does not output stereo) going to the SMS-1 which IS an external x-over, so I have the internal crossover OFF. The switch is set to Auto-on with the red LED lit (which is stand-by, I think). It goes to green if I turn it off and on manually, and seems to play correctly after I do that. I turned the SMS-1 output (called volume) up to about 60% and still did not get it to turn on when the CD starts up, but it will come on when cycled off and then back to auto-on.
Why aren't my subs turning on?
I have a pair of Von Schweikert VS-3/S subs. Auto-on appears to be the only option, but they do not turn on unless I manually turn them off and then on? They are being fed from the line level (called LFE) outputs of an SMS-1. One to each sub. Both were purchased used from diff owners; hard to believe that they both are independently defective in the same way. They both play when I run the auto-eq frequency sweep. I am sending same question to VS, but your thoughts would help. TIA.
- ...
- 19 posts total
- 19 posts total