New Electrial Wiring..


I am have an electrician pull (3) circuits into my "media room", a 20amp for my Bryston 28BSST, a 15amp for the rest of the audio set up and a 15amp for the HT set up...

Q: Is there a high quality type of wiring I should ask him to use? I will be installing "hi-end" outlets, but should any particular care go to the actual wires??

Thanks for you help....

John
jb8312
John,
There is a dealer here in Arizona that carries the New Cardas 10ga wire for the house.Can get pricy if you are doing long runs..but really good stuff.
Check it out at www.dedicatedaudio.com
I recently had an electrician run 3 dedicated, 10ga lines for my equipment. I used 20 amp breakers for all the lines and Teslaplex outlets also on all 3. (Read the reviews) Also you want to make sure that the breakers in your box are put in out of phase with the refrigerator or furnace/ AC breakers. One outlet is for Amp and preamp. One outlet is for digital and the third if for all other front end stuff, TT, etc. Sound of my Cary stuff after completion is really resolving. Surprised at the huge difference.
Consider at least one dedicated grounding rod for the stereo. Also, Walker Extreme SST on all contacts in the box and at the outlet.
No "dedicated" or separate grounding rod. A supplementary grounding rod must be bonded to the main grounding electrode. I won't repeat myself as to the whys here. See the following link to previous discussion in a recent thread.

http://forum.audiogon.com/cgi-bin/fr.pl?htech&1240417400&openflup&4&4#4
Post removed 
More to discover