20 amp dedicated lines

The dedicated 20 amp lines have made no difference in the sound of my system. Have you tried to measure the room response?

Kal

Dedicated lines are a huge bang for the buck in terms of sonics and low noise, but I don't think your not having them is what's at the root of your particular problem. And all your equipment is first rate, except I might want to do different ICs, still, I don't think they're the problem either.

No, if I had to guess, it's those 35' speaker runs. Even with those great SS amps, 35 feet of (anything) speaker cable is going to reduce damping enough to tip the sonic balance toward the highs.

You need, IMESHO (in my ever so humble opinion) to get a really good pair of long ICs and a really short pair of speaker cables. And that applies even if you're running single ended (and not balanced.)

I suppose someone could argue the JC-1s aren't getting enough juice, but that would be easy enough to establish without putting in the dedicated circuits. Just go to Home Depot and get a couple of 20 or 30 foot extension cords of at least 12 AWG (preferably 10 AWG) and plug each JC into different house (15A) circuits and see what happens. (You can always return the cords, HD is very nice about that.)

Proper line conditioning is an absolute must. So are ics and scs that minimize time smear.

The dedicated 20 amp lines will essentialy provide two benefits:

1) Minimize any harmful AC noise that is generated within your home ie refrigerator motors, microwave ovens, dimmer switches, etc..

2) Help endure that your amplifier has enough juice to more dynamically and realistically reproduce dynamic passages. A very big plus.

Dedicated lines will do nothing to filter out the AC noise in the lines coming in from the street. Everybody has this problem to one good degree or another and the only cure is proper line conditioning or components that have attempted to address the filtering issue inside the component but not both.

Your best bet is to audition a number of line-conditioners because quite frankly there some to many that simply aren't worth owning.

-IMO

I think the only way to find and solve your problem is to do some process of elimination things, first I'd move the amps close to the speakers and try some Rat Shack 12 gauge speaker wire just to see if thoses 35' wires are causing problems, next I would do some more speaker positioning and adjust cross overs, and the Home Depot cords are a good idea too. All these things will cost next to nothing and a bit of your time. I would spend some time on speaker placement and cross over adjustments as this can be one of the most PITA things to get right!