bdgregory
Responses from bdgregory
| Need tonearm advice for Clearaudio Innovation Wood I have a Satisfy and it's one of my favorite arms. | |
| Bi-amping for HT you got it, except unless you have a subwoofer connect to the SP12, it will be 2.0 | |
| Bi-amping for HT let me get this straight Byfo . . . you want him to buy a $900 switch so he can connect his $300 receiver and his $470 preamp to one amp, when both of them already have the capability to do this without an external switch? | |
| Bi-amping for HT that's right. Think of the preamp as simply being a passive connector between your HT receiver and your power amp when you're using it for HT. This way the volume control is fixed on the SP12, and the volume for all HT channels are controlled by t... | |
| Bi-amping for HT If I get a new Pre w/remote that still won't allow for 4 channels, correct? Wrong - you need to focus on what's going on in the scheme I described. for music - it's 2 channel, for HT it's 5.1, or 7.1, or whatever you configure. Furthermore, in H... | |
| Bi-amping for HT well, in HT Mode, it will indeed be fully remote controllable. But when in 2 channel music mode, it's the same as you have today. as Meiwan and I indicated, using the HT Pre for 2 channel music will be a bad idea. I've tried multiple high end HT ... | |
| Bi-amping for HT all HT receivers I'm familiar with have pre-outs and will work the way you are asking. The key is this - you want to feed the main outs from your receiver through your your SP-12 preamp in what is called "bypass" mode, and have your main speakers/... | |
| Need to start a collection vinyl must haves. Ricky Lee Jones - great on vinyl. | |
| If you could bring back one great artist that has Django Reinhardt | |
| New 'Vinyl Flat' flattener? I've always been too chickensh*t to try that with a valued record... . . . so was I, but I had one record with the edge so warped I couldn't play the first 2 tracks. It was possible to find a replacement, but would have cost. I tried a less valued... | |
| New 'Vinyl Flat' flattener? somewhere in the archives here there is a discussion of how to flatten warped LP's using your oven and 2 pieces of glass. I bought 2 granite tiles at Home Depot (the shiny finished ones, and follow that procedure: heat oven to 200deg, place LP bet... | |
| Powering Totem Sttafs and Rainmakers I've powered my Sttafs with many different amps and they all worked well. You don't indicate a budget range, but staying in the neighborhood of the NAD there are a number of options. I like B&K amps - and if you want to power 2 sets of speaker... | |
| Chicks With Guitars how about chicks with Basses? Start with Tal Wilkenfield | |
| 2 Channel Amp for Surrounds: Need Recommendations Why not get a dedicated 2 channel amp for your front left and right speakers and power the rest of your setup with your mc7. I think that would do more good than biamping with a multi channel amp and sharing a power supply with all channels. an ex... | |
| 2 Channel Amp for Surrounds: Need Recommendations you should consider B&K amps - they are the most neutral sounding amps, and the best value out there. Easy to find one |