elliottbnewcombjr
Responses from elliottbnewcombjr
| Speakers for audio and home theater TV/home theater/surround sound (my old stuff, but, example for tv/music solution):Watching TV, you want a 'wide center', many music speakers are for a precise center, off center loses one channel, and loses center, loses imaging.I got these DBX sp... | |
| Cartridge, Compliance, try what in my JVC UA-7082 Arm? grado service reply to me about their Mono Cartridge"Yes, the ME+ is compatible" (I asked about UA-7045 tonearm)they did not give any specific compliance info. | |
| TT, 12" Tonearm. Who tried and ended up preferring 12" arm? mijostyn while tempting, I am not going for the tt with tt61 and pioneer arm. I'm gonna get the stereo 7082 arm and cartridge/stylus resonled first.Then measure the distance: spindle to the rear hole of the tt I bought when it gets here. 7045 a... | |
| TT, 12" Tonearm. Who tried and ended up preferring 12" arm? lewm,I'm handy, I could fix the rubber of any 7045 I buy. Does the flexibility of the rubber make much difference? Being careful, before choosing the rear arm for Mono,I will wait to see the exact location of the existing rear hole on the dual ar... | |
| Cartridge, Compliance, try what in my JVC UA-7082 Arm? Being careful, before choosing the rear arm for Mono,I will wait to see the exact location of the existing rear hole on the dual arm tt I bought. We don't know what arm it was drilled for.UA-7045 is effective 9-5/8" I am warming up to the Grado ... | |
| Cartridge, Compliance, try what in my JVC UA-7082 Arm? uberwaltz,thanks, I looked it up, Denon DL-102 Technical DataOutput: 3.0mV Output impedance: 240ohms Stylus: 17.0 micron round tip Frequency range: 50Hz-10kHz Tracking force: 2.0-4.0g Weight: 13.0g Ideally, I hope to track with elliptical, Shiba... | |
| Cartridge, Compliance, try what in my JVC UA-7082 Arm? I may try a Shibata or SAS stylus in the JVC Z1 cartridge that is coming with the TT.Meanwhile, I am reading that using Shure's Dynamic Stabilizer Brush allows using higher compliance cartridges in some higher mass situations, like the JVC-UA-7082... | |
| Cartridge, Compliance, try what in my JVC UA-7082 Arm? Merry Christmas/Happy HolidaysMono Cartridge for UA-7045 arm...........................Grado ________ ME+. wgt. 5.5g; track 1.5g; output 5mV.COMPLIANCE ______? (exact or range, low, mid, high?) I just wrote Grado and asked what the compliance i... | |
| TT, 12" Tonearm. Who tried and ended up preferring 12" arm? well, compatibility with high output mono cartridge is the draw, IF it's a decent arm. I don't need VTA on the fly for the short momo arm..that base's wood is not sun bleached like the one I bought which I will re-finish. Perhaps I paint one Red! | |
| Cartridge, Compliance, try what in my JVC UA-7082 Arm? So, we find a stiff Mono cartridge IF I buy a Victor 7045 arm,or, I get a different arm designed for/will work with high output MM Mono cartridge. | |
| Cartridge, Compliance, try what in my JVC UA-7082 Arm? Well, I have tricky ways to avoid pushing the preamp volume up to hum zone. With current 4.0mV output, the hum starts just above my preferred maximum, that is why I am looking for high output, equal to 4.0mV.alt. use 1. Current. TT to McIntosh tu... | |
| TT, 12" Tonearm. Who tried and ended up preferring 12" arm? and, what about this Pioneer Tonearm? https://www.canuckaudiomart.com/details/649548072-victor-tt-61-quality-direct-drive-turntable/?utm_campaign=response-received&utm_source=notification&utm_medium=email | |
| TT, 12" Tonearm. Who tried and ended up preferring 12" arm? mijostyn thanks for your advice Mike. Today I rearranged equip, it will fit in better than I feared. Measured twice, cut once, I will be ready before it comes. He will ship from Canada after new years. | |
| TT, 12" Tonearm. Who tried and ended up preferring 12" arm? uberwaltz At first glance, .... but, the weight is all the way forward.I wrote the seller a few days ago, he moved the counterweight back as I asked him to do, and it sags more he said. https://www.ebay.com/itm/Victor-JVC-UA-7045-Tone-arm-In-E... | |
| TT, 12" Tonearm. Who tried and ended up preferring 12" arm? Now I need a 9" arm for a mono cartridge. I assumed I would get UA-7045 to go with mt UA-7082.two 7045 on ebay, both sagging counterweight, around $400. delivered.What do we think about UA-77, about $350. delivered. No rubber issue? https://www.e... |