grannyring
Responses from grannyring
| Is it save to convert XLR to RCA? It stays the same if all I do is turn off the amp and then turn back on. I may bring another speaker down to test as the problem only surfaced when a new speaker came into the system. Could it be a speaker issue? I know it is passive, but..... | |
| TRL Dude Dilemna ...or like most of us gets tangled up in the tech talk lingo of the day. | |
| TRL Dude Dilemna Direct coupled with transformers is one way to go, but according to the builder of the Dude it has sonic disadvantages - and certainly in his design. Most amps have ample input impedance and only a few can cause some rolling off at the extremes. A... | |
| Is it save to convert XLR to RCA? Ok , here is what I found. With the ic's connected to the direct inputs (RCA) on the amp no matter which input I chose on the selector the buzz was there. Did not matter as long as the ic's were connected. When I connected the ic's into the crosso... | |
| Is it save to convert XLR to RCA? My experience with hooking up ic's to an amp and leaving them open on the other end is a very loud and seemingly dangerous noise through the speakers. I don't think I will try that.... Right Al? | |
| Is it save to convert XLR to RCA? With the pre's ic's hooked up and the unit unplugged the buzz still lives. | |
| Is it save to convert XLR to RCA? Yes Sam. Chasing a buzz. The preamp need only be in the system and not turned on. Just the ic's hooked up to it.I ran a wire from the chassis of the pre to the chassis of the amp and still a buzz. | |
| Is it save to convert XLR to RCA? Well I once again removed all from the amp except the speakers. Turned the amp on and no buzz. I do get some tube rush from the tweeter in one speaker, but that must be my input tube in that channel. Just a tube hiss, not a buzz through the highs ... | |
| Is it save to convert XLR to RCA? I shorted pins 1 and 3 and still the same old buzz. I appreciate your help on this Al. | |
| Is it save to convert XLR to RCA? I tried that and no help. I have sub on the second outputs of my preamp. When I remove the sub from the system, still the same buzz.I wonder if that shorting jumper will work? Nothing in the manual. This Jensen transformer is said to help eliminat... | |
| Is it save to convert XLR to RCA? Al, I have a ground loop buzz I cannot get gid off and it is driving me out of my mind. I have tried everything. Cheaper plugs, changing IC's, isolating cables etc. My IC's are shielded .I changed speakers and nothing else, but now a ground loop i... | |
| Need help from other George Wright amp owners - Got my manual and answers so all set now. | |
| Is it save to convert XLR to RCA? Ok, I have a question. I want to use an xlr cable from my pre to amp. My pre is only RCA out. I want to purchase this Jensen transformer mentioned above and am not sure what to buy and if it will work? I assume they make one that accepts RCA from ... | |
| TRL Dude Dilemna One more thing I really need to add. Paul has a great ear and uses coupling caps in the Dude that are neutral sounding and of high quality. Understand I am a budding DIY guy and have modified amps, speakers etc... I enjoy it and am learning. Paul ... | |
| TRL Dude Dilemna The Duelund caps are the coupling caps. I also put these in and Pat and I are amazed at the sound. Keep in mind they cost $400 for the set of 2. We purchased the 3.3 uf value. They are first rate caps and very expensive.They replace the small caps... |