tls49
Responses from tls49
| I've narrowed it down but... Have you seen this review on the Denon?http://www.soundvisionreview.com/hi-fi-home-theater/amplifiers-receivers/denon-avr-x2100w-review/ | |
| Conrad Johnson CAV 50 I changed the power tubes (EL34) to the opposite sides and the problem persists. Did the problem stay on V7 or did it move to the other side? If it stayed on V7, the amp may need to be looked at by a technician. If a tube cannot be biased properl... | |
| Conrad Johnson CAV 50 I don't disagree that it's a nice integrated, however the SL6 is the wrong speaker to use with it. The SL6 is a power hungry, inefficient speaker that needs high current SS. | |
| Parasound A21 question - can I use both balanced and unbalanced input on the amp? Thanks Al, for your comment on my suggestion. This type of adapter can be found for less than $10 on either one of those huge online shopping sites, however, I chose to show the Gefen because I have experience with a few of their video products an... | |
| Parasound A21 question - can I use both balanced and unbalanced input on the amp? A possible solution might be to use this on the front L&R pre outs of the AVR.http://www.bhphotovideo.com/c/product/660217-REG/Gefen_GTV_AAUD_2_DIGAUD_GTV_AAUD_2_DIGAUD_GefenTV_Analog_to.html This will give you a PCM digital signal to input to... | |
| Recommended amp for Thiel 3.6 -- newbie Donzi, am I understanding correctly from your last post that you will only use the pair of Thiel speakers and no other speakers? If so, that would definitely change my recommendation. Also, what equipment do you currently have? | |
| Recommended amp for Thiel 3.6 -- newbie The Bryston is a 2 channel preamp, but it does not have a HT bypass input. It could work in a setup like the diagram, however, with no HT bypass input it will be awkward to use.The Marantz would be good if your main use was home theater with an oc... | |
| I read this on another site Looking at the measurements for the Sasha here,http://www.stereophile.com/content/wilson-audio-sasha-wp-loudspeaker-measurementsI'm thinking the Sasha is not a very tube friendly speaker and better suited for SS. Now if he were to try a very high ... | |
| Recommended amp for Thiel 3.6 -- newbie Right Donzi, and to use your words, you might say my suggestion sort of shoehorns the HT part into the quality part. This feature called HT pass through, HT bypass, or HT direct has been added to integrateds and preamps for the purpose to add HT t... | |
| Recommended amp for Thiel 3.6 -- newbie Donzi, in some cases, and only a very few, with an average under powered speaker, adding an amplifier to an a/v receiver can help. However, your speakers need a quality front end driving that high current amp to the speaker. The a/v receiver will ... | |
| Recommended amp for Thiel 3.6 -- newbie I agree with George, the speakers need an amp that can deliver high current into a low impedance load, and NO a/v receiver will do this, not even a flagship model. Also donzi, if you are going to look at wattage specs, make sure you consider the e... | |
| 8 Ohm Output into 4 Ohm Speakers Check your owners manual. There is a procedure for switching the impedance setting on the amplifier to use with 4 ohm speakers. | |
| Has anyone ever bought from Audio Liquidators Check Music Direct, today they have the S-3 for $1500, and they are an authorized dealer. | |
| Has anyone ever bought from Audio Liquidators You should read the company's warranty policy thoroughly. Since they are not authorized dealers for what they sell, warranty on any products they sell would be handled through them to a third party servicer. So in addition to the other risks men... | |
| Forward or recessed sound? Even with great layering, if it is all upfront or all recessed, that still sounds like it is somewhat 2 dimensional with not a much depth. |