Ancient Cable Experts Please Help.

I concur with Redkiwi about the possible conductor oxidization. (Now the part where the ANCIENT CABLE EXPERT part of your post applies!) My own experience with some of the early Monster speaker cables is that the oxidization can be limited to a few inches near the terminations and a quick remedy is to cut-back and re-terminate if you want to continue using these cables (??). But agree that you should try and listen to some more modern cable. Have fun! Richard at www.vantageaudio.com

Richard's and Redkiwi's thoughts are the same as mine. I had the old M-1000 interconnect, and after a few years the sound had degraded because of breakdown in the solder they used and oxidation in that area. This problem may have been limited to the earlier runs of the interconnect, as I recall reading something about that in Stereophile years ago. You could reterminate, probably, but while not all new cable designs are necessarily improvements, I think there are a good number of substantially better cables out there now, and your preamp will definitely let you hear the differences. Ultimately, let your ears be the judge.

Avoid ANYTHING with Monster's name on it. It is not good stuff. After a few years, solder will not stiff to it.

STICK, the word was supposed to be stick, not stiff. This is what happens when one becomes an ancient cable expert. The mind is the second thing to go. I forgot what the first was.

Even if working at their optimum, the Monster cable designs of that time were all high capacitance, and so had limited high frequency extension and a "congested" sound character. A strong "sell" recommendation, and upgrade your cables with a more contemporary design; you can't lose.