Paul Speltz Zero-Box Autoformer With Tenor OTL


Hello everyone,

is there anyone using Paul Speltz Zero-Box Autoformer with Tenor OTL and can give a full user experience please? My concern is whether the PS Zero Autoformer will degrade the extreme frequency of what the tenor the best for.

The speaker by now with the Tenor is Rockport Antares.

 

Thanks in advance for all the input.

 

 

128x128lawence_carpio

I tried Speltz Autoformers with Atma-Sphere M-60 OTLs powering 91 db flat 6 ohm speakers. Thought they significantly degraded the sound and returned them.

You should have enough power for Rockports.

I’ve read numerous reviews on these as I was considering them at some point to for my setup and the reviews were very positive. There is also a substantial window to return if they don’t help. In my case, I spoke with Paul and he recommended trying other options first.  He was very friendly and responsive via email and then phone.

glen

I had the first pair of Tenor OTL 70’s in the US, purchased directly from the NY audio show. They were with the volume controls, but as amazing sounding they were, suffered from reliability problems, and were fussy about speaker loads. Finally a lightning strike did them in. A few years back, I purchased a newly manufactured pair from the new Tenor Audio, with all the modifications and updates which are reliable, never an issue. They are still in my collection of tube amps, and I love them!! They sound beautiful with the built in volume controls, but I prefer driving them from my Audio Research 40th Anniversary preamp. It’s a sound that hooked me 25 years ago, and I missed it when I didn’t have it. Of course, with any OTL, speaker impedance is important. I don’t think it would be a good idea to try to change the impedance with an Autoformer, but I have no experience with that. I just think it would alter what makes these sound so great. Amazing on a Quad ESL 57, or a stacked pair wired in series. 

I’ve not heard an auto-former on any speaker so I don’t know how it sounds.  But, I too am skeptical about putting a transformer on an OTL.  Ideally, OTLs would be used with higher impedance speakers, so I can see why someone without the right speakers might cheat a little with an auto-former even if that is less than ideal. 

@larryi

ok, you are right, i did not realize that was what an Auto-former did.

OTOH the magic of the Tenor OTL is it’s singular purity and sparkle. why would you do anything to dumb that down? why bother with an OTL then?

now 20 years later, my experience with the Tenor OTL’s with the Kharma is my all time reference sound that still guides me in my music reproduction journey. if they did not ignite regularly i might still have them. :-)

I'd be contacting Rockport and informing them of my situation before asking if they had any comment they would like to share.

Mike,

I think you are talking about a linestage or passive volume control, including transformer/autoformer volume controls, whereas the original poster is inquiring about an autoformer inserted between the amp and speaker to reduce the output impedance of the amp (typically quite high with OTL amps).  I don’t know how this sounds, but this turns an OTL into an amp with an output transformer.

in 2001-2003 i used the 75 watt Tenor OTL mono blocks into Kharma Exquisite 1D’s with a passive Placette RVC (remote volume control) and was fantastic. in my opinion i got zero degradation and the combination was very solid, without any frequency response compromises. sometimes passive volume controls do restrict dynamics more than frequency response. but i felt that was never an issue.

at one point i did try the Bent Audio passive unit too; but i preferred the Placette.

in the picture linked below you can see the Placette sitting on the floor between the amps. here are pictures;

https://www.whatsbestforum.com/threads/getting-good-sound-from-%E2%80%9Cregular%E2%80%9D-rooms.39378/page-3#post-996101