2. cables
  3. 1259356440

Power Strip Question - PLEASE HELP

I need to power my audio system and various electronics from a single duplex outlet. Although this is less than ideal, I need some advice on how to avoid degrading sound quality.

Essentially, I want to buy 2 power strips for the duplex outlet. The first will be used exclusively for my audio system, while the second will be used exclusively for other electronics. Here is the breakdown:

1) Wiremold L10320 Power Strip (9 outlets, 6 foot cord):
- Naim Nait 5i-2 integrated amplifier
- Naim Nait 5i-2 cd player
- Pro-Ject Tube Box II phono pre-amplifier
- Pro-Ject Debut II TT (weak link, I know)

2) XYZ Power Strip:
- Alarm clock
- Phone charger
- External HD
- Laptop computer

My main concern is with the second power strip. I'm worried that these common electronics, being powered on the same line, might degrade the sound quality of my audio system.

Is there any way to limit the interference of these electronics, thus preserving sound quality? For instance, would a power strip with a surge protector limit the interference that these electronics may produce?

If possible, I would like some recommendations for power strips from Allied Electronics, since I will be buying the Wiremold from them (http://www.alliedelec.com/).

I don't have any strict requirements, but I would prefer an inexpensive unit (<$10, if possible) with a short cord.

Thank you so much for the help!
jferreir
ghosthouse's avatar
ghosthouse
4,306 posts
 
Honest1 - missed the OP's later post about temporary housing and landlord restrictions.
Jferreir - My thought was to leave one duplex receptacle available for your amp (i.e., plug it directly into wall). Plugging a strip for non-audio devices into the H-10 would take advantage of any isolation the H-10 provided.
theduke
372 posts
 
Dlcockrum is right. You need a conditioner with duplexes which are separate from each other. A perfect choice would be a PS Audio Quintet. Plug your components into each separate power duplex. Plug your non audio stuff into a power strip and plug that into the other wall socket. Also, please don't dismiss conditioners out of hand. The PS Audio one is excellent as are others. Experiment! You can achieve a cost effective solution!
sgr's avatar
sgr
689 posts
 
The PS Audio would be the best. Just plug everything into the wall listen, have fun, and forget all the stress this is causing you. Life is too short!
stewie
187 posts
 
Ditto what Sgr said. FWIW, I've got lots of stuff going into the same outlet via $15 True Value surge protector strips, though most of the stuff is rarely playing at the same time. Everything is dead quiet and crystal clear.
jferreir OP
45 posts
 
Well, after much consideration and conflicting advice, I've decided on the following...

I will purchase the Wiremold L10320 for use with my audio system. This specific power strip has no additional performance limiting features and it's recommended by Naim. Although a power transformer would be ideal, performance-wise, it's simply not practical given my budget.

I will have to experiment with my non-audio gear to see which setup sounds best. I've simply accepted the fact that with a budget of less than $100, some compromises in SQ will have to be made. That said, my audio system isn't even assembled yet - still waiting on the Harbeth P3ESRs - so I need to keep things in perspective. Besides, I'm sure the quality of my TT will be more of a limiting factor, SQ wise, than will the quality of my power source.

Either way, thank you for the multitude of suggestions!
More to discover