Spatial Audio Raven Preamp

We take for granted the very low prices of modern solid-state electronics. For a little perspective, look at the price of a RCA 21" color TV or Fisher FM/AM receiver in 1964. The cheapest color set was $500, and the receiver was $350. Wow, what a deal! Fire up the DeLorean!

Well ... not really. Gold was $35/ounce back then. It trades for $2681/ounce as of tonight. You could get a decent house for $12,000 back then, and a really nice car for $3000. So that color TV with a 21" screen really cost about $5000 ... for the entry-level model. The floor model with a nice wood cabinet cost $8000. Or you could buy a 19" monochrome TV on a metal cart, with very poor picture quality, for $1800. That Fisher cost $3500, with the optional wood cabinet another $300. And no discounts either ... Fair Trade prices were enforced by the FDR-era Fair Trade Commission, not the free-for-all we have now.

Quality tube electronics cost about the same now as then, which is no surprise because they are made the same way, with lots of hand labor by skilled assembly people. Cars likewise are complex and require lots of labor as well as capital investment, despite operating in a hyper-competitive world market.

If what you want can be made with integrated circuits put on a circuit board with a pick-n-place machine, and the labor is minimal, you can have it at a price less than a tenth of what it cost back in the Golden Age. And I would take my 65" Sony 4K Q-OLED display over any 21" RCA television with a resolution lower than 330,000 dot triads. That’s a super deal by any standard.

The value kings today are Class D amps with built-in streamers. Plug and play, the same as that 1964 Fisher receiver. Anything else is a luxury ... it’s up to you to find your happy medium.

Personally, I find the tonality and subjective realism of transformer-coupled vacuum tubes to be unmatched by other technologies, but that’s just me. I got on that train back in the late Nineties with the Amity amplifier, and have been on it ever since.

@donsachs mentions the Bottlehead kit as an option for DIY enthusiasts. I would like to note for those of you whose budget won't allow for the purchase of a Raven, and are willing to take on a DIY project, you can purchase an Audio Note Kits (ANK) L3 transformer coupled preamplifier kit for about $2,500. This will introduce you to the benefits of a transformer coupled output as @lynn_olson references above. These kits use very nice parts and are relatively straight forward to build. I myself built the L5 Mentor, and when you look at the price of that kit, it's right up there with the Raven which is sold as a completed build. Which goes to show the cost of the Raven is not unreasonable for what you are getting. In fact, I would have expected a preamplifier of the Raven's level of quality to cost more. So cost wise if I had to do it all over again the Raven would be a serious contender for me.

Personally, I find the tonality and subjective realism of transformer-coupled vacuum tubes to be unmatched by other technologies, but that’s just me.

While I like my L5 Mentor and enjoyed building it. I now use direct coupled preamplifiers and amplifiers. No capacitors or transformers at the output. Which is where I would stray from the comment from @lynn_olson as well designed direct coupled components in my experience take the tonality and realism up another level.

Personally, I find the tonality and subjective realism of transformer-coupled vacuum tubes to be unmatched by other technologies, but that’s just me.

There are class D amps now that easily rival the best tube amps for every quality mentioned in the above post. Every bit as smooth in the mids and highs, depth properly portrayed, good low level detail and so on.

Instead of a 1/4" thick sculpted aluminum faceplate (marketing!), we put the money into custom parts that are in the audio path.

FWIW Dept.: A machined front panel can be used to reduce chassis resonance (by having a different resonant frequency as opposed to the chassis, the two rob energy from each other), making for a lower vibration environment for the tubes to do their work. If a circuit board is used, it can be isomerically isolated from the chassis, further reducing microphonic interaction. If no circuit board is used, the sockets themselves can be isomerically isolated from the chassis with similar results.  Especially if the preamp is used in the same room as the loudspeakers, this has both measurable and audible improvements- bass is better, the mids and highs smoother with greater resolution. Damping materials can be added to most chassis, further assisting to reduce microphonics (distortion).

I spoke with David at Spatial last week, and the time has finally come that I will be placing my order for my Raven Preamp in the next week or two while I am home for the holidays. I've been saving for a very long time being retired now. I will get to enjoy it later this spring after it's made and delivered and I return home again for the Spring/Summer. I started this thread in April. I hope ya'all are enjoying your Raven's!

My Raven only displays a max volume level of 63.  Is that normal?

Thanks 

Richard