2. speakers
  3. 161560-108804

Speaker Positioning

I know from speaker position is critical in achieving the best results from a given system. Is there a dynamic way to measure placement of each speaker to make certain they are the exact same distances from back/side wall, cabinets, seating, etc. beyond a measuring tape and listening to the results? Seems to me if minor differences pay large returns, you could be tinkering with this a long time.  Thanks for the indulgence.  
128x128sj00884
oldhvymec
5,101 posts
 
Well when you get to end of the setup, what else matters.. Still have to listen.

I understand difference in ear balance vs measured balance, vs SPL balance  (left and right speaker matching). It does vary quite a bit actually.
Depends on who made the stuff or if they even care..

ROOMS forget about it... no two are the same.. Anything goes..

To thine own room be true.....Know your room....:-)

Regards
twoleftears's avatar
twoleftears
5,318 posts
 
Bosch laser measure, inexpensive model.  You can check the exact distance between you and the two speakers, and you don't need someone to hold the other end of the tape measure.
gdnrbob
4,444 posts
 
@twoleftears , +1 
A laser measure will be the most accurate.

@OP,
There are other measurements that can be considered. Sound pressure level, frequency response are just two.
If you are serious, why not contact a high end dealer to assess your system?
I bet you'll learn a few things just watching.
Bob
fuzztone's avatar
fuzztone
5,595 posts
 
Start with a laser to (+1 on Bosch) to get each within an inch of each appropriate ear. Then fine tune (especially toe in) according to soundstage. If the wall placements are equal move one until it sounds best and match the other first. If not good luck.
Measurement and dynamic are oxymoronic.
erezitz's avatar
erezitz
7 posts
 
check out the book “Get better Sound” or Wilson’s Audio Setup procedure in YouTube
More to discover