Tekton Double Impacts


Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
I've been reading a lot of the posts here and while I'm satisfied with my current (sort of vintage) KEF R107s, the enthusiasm from DI owners has me considering a pair for demo.
My question is: With the rear ports, how close to the back wall could one realistically run this speaker? I'd have to install along the rear wall and would only allow for 6" most of the time. I could pull them further out for critical listening which would put them about 9' from my listening position.

The KEFs being vented at the top and front, allows me this positioning without reinforcement from the back wall.
Any thoughts?
@lancelock  I'll let you know. Thank you. Hopefully my travel-ability will open up this fall.
Bob, There are a number of folks using the DIs or similar up close to and nearly touching the front wall. Hopefully they will respond and answer your question / concerns directly.

If you do go ahead with ordering a pair, I would get an absorptive panel installed against the wall, immediately behind the ports. I don’t recommend ’plugging’ the ports.

My DI SEs are well out in my room (just so you know) and the ports are free to breathe. I have a home-made absorptive ’solution’ about 2 feet behind each speaker.
@david_ten 

this fall is perfect because the Capital Audiofest is right down the road.