The best tweeter design


Been giving some thought on the best tweeter design and I came up with the following list:

1) Plasma
2) Ribbon
3) Horn-loaded
4) Diamond dome
5) Ring radiator
6) Inverted dome

But since 1-3 are hard to implement or expensive most speakers start at #4, at best.

Thoughts?
cdc
Hello Atmasphere,

Interesting and i do believe i know the design of what you speak, just 4 times the size of the one presented.

Funny the comments about ribbons being Beamy, IMO it's very dependent on application and not necessarily a reflection of ribbon topology.

They ( ribbons) have issues ( eff/load ) but beamy is not one of them and I'm not saying you are incorrect, as i have heard such myself, also from ESL's and IMO sounding "Beamy" has more to do with poor integration and design than Ribbon topology.....

(Defining ribbon tweeter as a vertically suspended diaphragm suspended in a magnetic field,open freely front/ back and tensioned only at it's vertical ends...)
As far as ribbons being beamy. In my experience, not all ribbons are beamy. It does have more to do with ribbon design (dispersion pattern) but not all ribbons are beamy. Also, some of this can be overcome, by crossover frequency & slopes. I've seen open back and sealed back ribbons and one where the ribbon was mounted horizontally. Hopefully everyone has sat in front of a good set of ribbons, what they do, they do very well. Again, I've always been a budget builder. I've tried a few sets of HiVi's, theirs are a mixed bag and some of their ribbons have an extensive rise on the high end that bothers me, One in particular was quite good. I've played with Bolender Graebner and an old Fostex. Some of the Fountek look promising and I've seen great results with RAAL. Unfortunately, I have not yet figured out how to just look at a ribbon and tell if it will be beamy. I know none of this is really a help, but to say, there is alot out there, some of it is very good.
Why is an inverted (concave) dome on this list if a conventional (convex) dome is not unless made of diamond or horn-loaded, and leaving out 'soft' domes unless configured as a "ring radiator"? Too arbitrary to be meaningful IMO.

[I'm deleting the rest that originally followed the above and reposting it in a new thread.]
I'll take the Lansche plasma tweeters. Zero mass, no ozone production (as it is converted into pure Oxygen). The sound is incredible.
a tweeter is only as good as the capacitor in front of it! a few years ago I have change the stock mundorf silver/gold caps in my avantgarde omega duos against teflon v-caps. the improvement was dramatic. a costly upgrade though.
really amazing how much music "gets lost" in even a good mundorf cap!!