2. amps-preamps
  3. 1437424100

McCormack DNA-1 rear fuse won't stay in

I have a McCormack DNA-1 that I purchased new 20 some odd years ago. It is in my condo which I only live in during the week. Everything was fine when I left on Friday but today I come home to find that it won't power up. First I check the rear fuse and it seems fine but it won't latch back into place. I have looked at the fuse holder and don't see how it latches back in - usually you depress and turn it and something rotates under something else to hold it in place but I don't see anything like that on this fuse holder. Has anyone else experienced this issue? Does it need a new fuse holder?

Thanks in advance,

Bob Martin
wz4rfv
kr4's avatar
kr4
3,685 posts
 
Seems like a good possibility.
timrhu
2,779 posts
 
Duct tape
stevemcx
166 posts
 
The DNA-1 fuseholder is a "bayonet" type - push it in slightly with a blade screwdriver and rotate CCW 1/4 turn to release. Push in and rotate 1/4 turn CW to reinstall. It is possible that it might be damaged and not working properly so check it carefully for proper operation before plugging the AC cord back in. The fuse should be T8A - 8 Amp slow-blow. You can go up to T10A if need be but stick to T8A if possible. If the fuseholder is damaged and you are a DIY kinda guy, you can replace it with any similar holder that fits properly. ACME Audio Labs has a good one that has been silver-plated and cryo-treated for $6.

Good luck - I hope it goes well. Let me know if you need any help.

Best regards,

Steve McCormack
SMc Audio
wz4rfv OP
7 posts
 
Steve,

The problem is when I push in and rotate, the fuse pops right back out. So, new fuse holder it is. Thanks for the lead.

Bob Martin
wz4rfv OP
7 posts
 
Looks like we need a Plan B. I got the fuse holder and it's the wrong diameter! It's too big and won't go in the hole and filing the hole larger is a bit past what I want to do and a delicate electronic component. The nut from the fuse holder I received slides right over the threads of the fuse holder I removed. Any ideas?

Thanks,

Bob
More to discover