Capacitor log Mundorf Silver in Oil


I wished I could find a log with information on caps. I have found many saying tremendous improvement etc. but not a detailed account of what the changes have been. I have had the same speakers for many years so am very familiar with them. (25+ years) The speakers are a set of Klipsch Lascala's. They have Alnico magnets in the mids and ceramic woofers and tweeters. The front end is Linn LP12 and Linn pre amp and amp. The speaker wire is 12 gauge and new wire.

I LOVE these speakers around 1 year ago they started to sound like garbage. As many have said they are VERY sensitive to the components before them. They are also showing what I think is the effect of worn out caps.

There are many out here on these boards I know of that are using the Klipsch (heritage) with cheaper Japanese electronics because the speakers are cheap! (for what they can do) One thing I would recommend is give these speakers the best quality musical sources you can afford. There is a LOT to get out of these speakers. My other speakers are Linn speakers at around 4k new with Linn tri-wire (I think about 1k for that) and the Klipsch DESTROY them in my mind. If you like "live feel" there is nothing like them. In fact it shocks me how little speakers have improved in 30 years (or 60 years in the Khorns instance)

In fact I question Linn's theory (that they have proved many times) that the source is the most important in the Hi-Fi chain. Linn's theory is top notch source with lessor rest of gear including speakers trumps expensive speakers with lessor source. I think is right if all things are equal but Klipsch heritage are NOT equal! They make a sound and feel that most either LOVE or hate. (I am in the LOVE camp and other speakers are boring to me)

So here goes and I hope this helps guys looking at caps in the future. Keep in mind Klipsch (heritage Khorns Belle's and Lascala's especially) are likely to show the effects of crossover changes more then most.

1 The caps are 30 years old and
2 the speakers being horn driven make changes 10x times more apparent.

Someone once told me find speakers and components you like THEN start to tweak if needed. Don't tweak something you not in love with. Makes sense to me.

So sound
Record is Let it Be (Beatles)
The voices are hard almost sounds like a worn out stylus.
Treble is very hard. I Me Mine has hard sounding guitars. Symbals sound awful. Everything has a digital vs. analog comparison x50! Paul's voice not as bad as John's and George's. Voices will crack.

different lp
Trumpets sound awful. Tambourine terrible. Bass is not great seems shy (compared to normal) but the bad caps draw soooooo much attention to the broken up mid range and hard highs that are not bright if anything it seems the highs are not working up to snuff. I have went many times to speaker to make sure tweeters are even working.

All in all they sound like crap except these Klipsch have such fantastic dynamics that even when not right they are exciting!

Makes me wonder about the people who do not like them if they are hearing worn out caps and cheap electronics? Then I can see why they do not like them! If I did not know better from 25+ years of ownership that would make sense.

For the new crossover I have chosen Mundorf Silver in Oil from what I have read and can afford. I want a warm not overly detailed sound as Klipsch already has lots of detail and does not need to be "livened up" they need lush smooth sounding caps. Hope I have made the right choice?

When the crossover is in I will do a initial impression on same lp's. Right now it goes from really bad (on what may be worn vinyl) to not as bad but NOT great on great vinyl. (I know the quality of the vinyl because tested on other speakers Linn)

The new caps are Mundorf Silver in Oil and new copper foil inductors are coming. I will at the same time be rewiring the speakers to 12 guage from the lamp cord that PWK put in. PWK was a master at getting very good sound often with crap by today's standards components.

The choice of speakers would be a toss up now depending on what I am listening to. Klipsch vastly more dynamic but if the breaking up of the sound becomes to much to effect enjoyment the Linn would be a better choice on that Lp. If I could I would switch a button back and forth between speakers depending on song and how bad the break-up sound was bothering me.

volleyguy
I did take advice from this thread and used some extra Duelund silk from some old Duelund Copper wire I had left and put it on the leads of the CAST cap.

I also tied down a CAST cap that was "dangling". (pretty bad really)(started to feel guilty)

Oh boy am I going over the edge? (LOL)(really though it does make sense we spend so much money for CAST'ing process then let the leads float.
Ok here is an update on the cap and resistor upgrade I did on my speakers. First I want to say to those who feel caps and resistors don't need to burn in and that any changes we hear are our ears getting used to the different sound. Your wrong! Ha! Just plain old mistaken.

I listened to my speakers for two days right after the mod and was kind of concerned as the highs and mids were thin and not very musical. I just could not stand it. I grabbed my Bel Canto integrated and an Oppo 83 CD player from a second system and just played my speakers 24/7 with a special burn-in CD and all kinds of music. I did not have a chance to get used to the sound as I did not listen and just left my music room located in my basement the moment I loaded a new CD on repeat mode.

After 4 days or some 80 hours I listened to my main rig again and just smiled! The highs are now far more open and filled the room. No trace of thinness or etched sound anymore. A completely different speaker compared to what I heard 4 days earlier. Rich and smooth is all I hear now! The speakers sound more open and relaxed then before the upgrade. Yes the upgrade was worth my time and money.

In the future I will upgrade to Duelund resistors in the Zobel Networks and Duelund caps on the tweeter and midrange drivers.

I will plug the use of Obbligato premium gold caps on tweeters and midrange drivers in a crossover. They are only $23- $35 per cap depending on the value and far better than Solen Fast Caps in these crossover positions.

I may use Jupiter Flat Stacked or Clarity MR in the Zobel networks as I believe they do make a difference. I can say for sure the Mills MR12 resistor connected to the tweeter cap provided I nice improvement over the sand cast resistor used in that position.
That's good news Bill. The stock speaker is exceptional to begin with and makes a wonderful foundation. High quality modification/parts elevate it to the level of "superb" sound and tremendous performance /cost ratio. Lampizator-Dude-Coincident, how can you lose?
Charles,
Just an addendum to my original capacitor parts list, the capacitors I'm installing in my Total Eclipses are going to be Jantzen Audio Superior Z-Caps in all positions except the tweeter cap (which is Duelund VSF black). Charles, one of these days I'd love to look inside a Total Eclipse II and try and figure out how your crossover could be so different. I'm completely jealous about the positioning & type of your crossover components. Prodigiously more upgrade friendly than mine.

I've now passed a circuit diagram of my tweeter/mid crossover on to Bill(Grannyring) and think we may get some clarification about whether I have a Zobel network.

As usual, huge thanks everyone. I truly feel as though I'm not doing this alone. For the record, I have a family & these speakers were hard earned and are treasured and I wouldn't risk doing what I'm doing without some serious support and that's down to the incredible generosity of spirit of people in this forum.

Cheers, Tas
Tas,
You chose a speaker that should satisfy you for the long term.
I think all Coincident speakers utilize a zobel network to ensure a pretty flat impedance across the board.