Lamm M 1.2 against Tenor 300 and Boulder 2060


I own a system based on Avalon eidolon with Halcro electronics,EMM labs and NBS black label and Kharma enigma cables.

I´m insterested to change the electronics for the a hybrid amp, as Tenor 300 or Lamm M 1.2 or for the Boulder 2060.

I will be pleased if you can help me, almost I´m interested about to know how compares the Lamm M 1.2 and the Tenor 300, also one important consideration for me is the relation price/sound quality, the Lamm seems to be less expensive, around 40% than the Tenor.

I demoed the Boulder, sounds well, but not much much different or in another league than my Halcros, which is your opinion?.

Finally which preamp do you think I will need to be used with Lamm M1.2 or Tenor 300, new CJ ACT2? Aesthetix? Wyetech? CTC? Connoisseur? Lamm?

Thanks to all for your advice.
batiportbf80
I auditioned both the Lamm's and Tenors
Both great amps
I bought the Lamm's and just love the sound
I run an AA Capitole direct to the Lamm's and to Von Schweikert VR 7's via all Nordost Valhalla interconnects and speaker cables
Simple system - divine sound
Enjoy the shopping
Jim
Since you are in Spain, may I urge you to visit the dealer there who sells Lamm electronics and Rockport Technologies loudspeakers, reported by some people as having one of the best sounding setups in the world. I don't have contact information but either of those companies would be able to refer you.

Brian Walsh
I would second Brian's advice. The Halcro and Boulder electronics, in my auditions of them, are excellent but neutral almost to a fault, if that's possible--they reveal so much detail that I wind up hearing more of the recording and the upstream equipment than the music, and that's not the balancing act I want. The Lamm electronics are also pretty close to neutral, but have a slightly dark sound in comparison (neutral but probably a little rolled off in the highs), which I like, and they let the music through beautifully. Have not heard the Tenor, only good things about it. If you go with the Lamm amps, I'd strongly urge using the L2 preamp with them, a great piece of equipment and an excellent match for their amps. My Lamms work very well with NBS cables (Omega 0), by the way, if that's a concern.
I am curious about what type of sound you are really looking for?

Despite the rave press surrounding the Halcro and Boulder electronics, many people, whose ears I trust, seem to share Rcprince's opinion. I hope to audition them in my own system at some point. In general, my understanding is that of the two, the Boulder is often considered somewhat more "musical." I am only familiar with the 18w Lamm and the 75w Tenor, but not any of the hybreds. I have not heard the Tenors with Rockports, but I have with Wilson X1-IIIs. I found them to have a beautiful, but somewhat classic tube midrange and lacking at the extremes compared to high powered SS amps or large VTLs. The Lamm is beautiful sounding, but I also believe they are somewhat restricted on top. To my surprise (having been devoted to tubes for years), I became captivated by the Levinson 33s. I found them to have the least sonic signature of the many amps I auditioned, and without the overly defined character I typically find to be ascribed to the Halcro and Boulder amps. I will also add that the 33s sounded considerably smoother and less SS than the 33H amps, both running at 220v. I cannot understand those who describe the 33H as the less powerful sonic equal to the 33. No comparison. Just my two-cents worth.
The Eidolons need more damping factor than any tube unit will allow, the Lamm included, to control the bass. I have heard the Tenor and prefer the 75w tube unit to the hybrid units and think you will run out of steam with the 75w OTL.....Not familiar with the Boulder, but have a preamp customer who uses a Boulder to drive Avalon Osiris in a huge room, the first amp that had enough power to do so......He liked the JC-1s, but they didn't have enough power for the basketball court he calls a listening room......If you have the time we could build a preamp for you and, if not, the top of the line Lamm is an excellent choice as it is in "production" rather than built to order.