Aroc, I can't add anything new to this thread, only to reinforce what has already been said, particularly Tireguy's comments relating to high powered amps and specifically their capacity to deliver current.
I learned the hard way with my 3.6's, being stubborn as a mule I ignored peoples advice here, and splurged on a pair of Cary V12i Monoblocks, thinking that 200 tube watts would be plenty. Well the midrange sounded great, but the sound just wouldn't open up - stage depth and width were constricted and the sound was a little lifeless and bland.
I even tried vertical biamping with a pair of Perreaux amps, providing more watts than the Cary's, but still not enough!!
I even had a SS Mac 252 on home demo that puts out 250w into 4 and 8 ohms, I gave myself a hernia carrying it into the living room and the blasted thing shut down on thermal overload after 5 minutes of playing at moderate levels.
I'm now using a Krell FPB200, and although it technically is still only rated at 400w into 4 ohms, it does a much better job of opening the speaker up than anything previous. Based on my experience with the 200w Cary, I would guess that even a 450w amp like the VTL Mono's might be marginal. Remember also that as soon as the amp starts clipping you are going to start blowing fuses in the speakers.....I blew a dozen tweeter fuses using the Cary's and Perreaux's, even at modest volumes and even though the amps didn't sound strained in any way. I haven't lost a fuse yet with the Krell, (touch wood) and I play at even louder volumes.
Sell your soul to the devil, do what ever it takes, but get a pair of VTL 750w Mono's or bigger!!
Rooze
I learned the hard way with my 3.6's, being stubborn as a mule I ignored peoples advice here, and splurged on a pair of Cary V12i Monoblocks, thinking that 200 tube watts would be plenty. Well the midrange sounded great, but the sound just wouldn't open up - stage depth and width were constricted and the sound was a little lifeless and bland.
I even tried vertical biamping with a pair of Perreaux amps, providing more watts than the Cary's, but still not enough!!
I even had a SS Mac 252 on home demo that puts out 250w into 4 and 8 ohms, I gave myself a hernia carrying it into the living room and the blasted thing shut down on thermal overload after 5 minutes of playing at moderate levels.
I'm now using a Krell FPB200, and although it technically is still only rated at 400w into 4 ohms, it does a much better job of opening the speaker up than anything previous. Based on my experience with the 200w Cary, I would guess that even a 450w amp like the VTL Mono's might be marginal. Remember also that as soon as the amp starts clipping you are going to start blowing fuses in the speakers.....I blew a dozen tweeter fuses using the Cary's and Perreaux's, even at modest volumes and even though the amps didn't sound strained in any way. I haven't lost a fuse yet with the Krell, (touch wood) and I play at even louder volumes.
Sell your soul to the devil, do what ever it takes, but get a pair of VTL 750w Mono's or bigger!!
Rooze