Best Integrated Amp? Help...

Nope, don't own and am not selling any Blue Circle gear. I do like how they sound and have a soft spot for hand made gear from builders with a passion for music and elegant designs. Blue Circle gear is hand wired with no unnecessary circuits in the way and they sound like it.

In general, I like solid state and tube gear that are dead neutral to just a bit on the warm side. For example Naim, Musical Fidelity, ARC, Cayin, PrimaLuna, Simaudio, Shanling, Vincent, Primare, and some Classe, some Conrad Johnson, some Mark Levinson, some Macintosh and even some NAD pieces. While I crave resolution, I am not crazy about super dry solid state gear, and I have very little experience with ultra high end amps.

With that said, many of these makes and other suggestions you have gotten in this thread list for well over your suggested budget and are not likely to be available at any given time on the used market, and/or don't have the power needed to drive your speakers.

Yes I like the Blue Circle as a potential one-box match for the 804's because it should sound similar to the Classe with a bit more detail and refinement - maybe not quite as good as the BAT (a high bar!!!), but not far off either. Dollar for dollar, the Chinese companies are building some really great stuff these days, and the Shanling suggested above is a good deal. If the Blue Circle is too rich, I would look at the Shanling A-3000 or the German made Vincent SV-236 Hybrid, both available new within your budget and capable of driving the B&Ws.

Dcstep,

I hear you but watts usually cost about $25-$50 a piece in tube land, $10-$20 a piece in transistor land and $5-$10 each in switching amp land.

For some perspective and sympathy with your point - the best I have ever heard the little B&W CM1's sound is when driven by a 500W/ch Type D Rotel amp.

All I can really say is facts is what they is and budgets were made to test us...

Agreed, watts aren't free, but they're clearly useful, particularly with dynamic speakers like the B&Ws. I think that more and more people are looking to China for their watts, because of the cost per watt is so steep for US-made amplifiers.

Dave

I have a NSCS and have had it since they first came out. My search for a front end came to an end.
In my system the synergy is extreme.

I have had great sucess with Musical Fidelity and B&W 800 series. I have an A308CR preamp and Bryston 7b ST monoblocks. The MF A308 has a "tubelike" top end that works very well with nautilus tweeters. I have heard many say that Nautilus tweeters and Bryston amps are harsh. I have never had this problem with N801's nor with S800's.

You can go the same route with a Musical Fidelity pre like an A308, A3.5 or A3.2 pre(I also have a CD Pre 24 in my office - awesome unit, Preamp, CD and DAC/ADC in one box) and a Bryston 4Bst amp if you don't mind going separate.

If you can find a MF A308CR integrated, it should be below your budget. The A308 is teh last to be made in England and supposed to be extremely reliable.