Salamander Cabinet Resonance Problem. Help

Jim, I have a twin 40. I chose it because I have a 6 year old and a 2 year old. Both boys would be playing with my gear if I did not keep the doors locked. When music is playing at very modest volumes, I can feel substantial vibration if I put my hand on top of the components. I tried Black Diamond shelves and cones. They did not help with the vibration. They did change the sound but not to my taste. I have my DAC on a Mapleshade platform: triple point brass cones, 2" maple shelf, and isoblocks. On top of the DAC, I have 2 of their heavy hats. This has helped quite a bit with the amount of vibration that I feel on top of the DAC and I like the sonic results. Bobby, from Merlin, sent me some anti-resonance disks as part of his most recent modification for his VSM-M speakers. I have one on my BAM (bass augmentation module) and one on my preamp. They have cut down the vibration and have had a positive effect on the sound. You might try some equivalent of these. A dealer recently recommmended taking the feet off the Salamander and putting the cabinet on two Arcicci Air Head platforms. He said the more weight that you have on top of them the better they work. I have not tried these. I have read about two companies the seem to really know the science involved. They are Silent Running Audio and Nuance. SRA makes platforms that are specific to the weight and distribution of the weight of your individual components. I am planning on ordering these once I make a decision on my next amps. I am interested to read if anyone else has any ideas.

Leave all sides and backs away and just have the four posts and the boards you put your gear on. I have two 40 rags with two bridges in between. Looks terrific and offers no problem at all resonancewise. The upper board is holding the VERY heavy McIntosh MC 2000 and the lower board carries REVEL'S LE-1 crossoveramp -both around 60kg's each. Maybe that this weight affects the rigidness of the two SALAMANDER "colums": Anyway - forget about any sides or backs!

You can try using caulk compound in order to lessen the vibration effect you're experiencing. Seems that the rubber wrap Chouca mentions is lacking in your rack and causing the problem. Try to get them or maybe in the meantime use some rubber cuttings from an old bike inner tube

I have the Twin 30 with cherry side panels. They do not ring or resonate. Perhaps you could exchange your mesh for the "wood" sides, or buy the "wood" and sell the mesh on this site.

I have the Twin 40 with the mesh side panels and mesh doors. The mesh side panels don't resonate at all (they include the rubber edging). I have a lot of gear inside it including a 100 lb. amp which may be dampening the vibrations. I have it on wheels so I can move it out. The rubber in the wheels may help too. I'd like to add some additional isolation under my DAC and transport, but the transport is a top loader and requires lots of headroom so I don't think I have room for it. Mapleshade said they could build custom maple shelves to fit the Salamander rack. I may revisit that idea someday.

I have the mesh side panels to dissipate heat from the amp. I needed something to keep the dog's tennis balls out and eventually we'll have kids too. I don't have locks on the doors yet, but plan to do that. It's been a great rack. Looks great and it's easy to change the shelves. One of the door hinges came loose and Salamander shipped one 2nd day air no questions asked. We have it in our living room and it doesn't look like an audio rack.