Soliloquy 6.2 Very Poor Treble .....

I have 6.2s and I agree they could use a bit more sparkle. Did David not say anything about swapping to the newer sputtered aluminum tweeter? I dont know if that would help but it could. You may even have these tweeters already?

I have been thinking of both a tweeter change and a high quality Xover. Not out of necessity though. Simply because I love to tweek =). I'll let you know if I decide on either and the results.

Without knowing your system I can only make a few general suggestions.

Another A'gon member suggested I use Analysis Plus cabling. I already was but, I can tell you these babies lost a lot of highs when I swapped the APs for transparent. I agree, try some AP cabling.

These things take forever to break in. The highs were very muted the first 250 hours or so. Have you allowed enough break in time? 500 hours plus.

The grills have a profound impact on the highs.

I love mine the mids are utterly seductive and the bass is tight and articulate.

I am using these next to some Pro-ac 2's and they don't have the life they should have....I don't think. I have two systems in my home , one having a Audio Research LS-25 and a VT-100 with a pair of Aerial 10-T's. The other system has a Audio Research LS-14 and a Classic 60 with the Pro-ac's . The second system also has the Soliloquy 6.2's which need some help....I have not got a response from David at Soliloquy

Autospec,
How many hours do you have on the speakers?
They sound like doo doo for the first 300-500 hours.
Also, Distortion is right about Analysis Plus. We went to AP silver speaker cable, and it made a big difference. Finally, if you have the requisite number of hours on the speakers, try some jumpers or bi-wire. Those brass plates don't work too well.

I have them bi-wired with Audio Research Litz Line. I am not sure about the time on them, maybe 2-3 hundred hours...

Surprise to hear the 6.2 to have poor treble,I own the 5.3 and the HF are just great and extended and the 6.2 is supposed to be more open.

I used the newer aluminium tweeters in them and did not like it one bit(along with a friend of mine that also owned the 5.3 and the 6.2).

Sounded too hard,the soft dome tweeters(I assume you have the same?)were more revealing but smoother and natural.

Also a lot of people may not know that at least for the 5.3 and maybe the 6.2 the phase is inverted for the tweeters to increase dispersion,I've changed mine back to have them in phase with the rest of the drivers and have the sonics more focus and highs extended.

could it be it?

You should email my friend he knows a lot about soliloquy speakers and the 6.2.

Let me know

T.