If you lean toward the M2-12R, you might look further into the 3012R. Before purchasing mine I probed the web and a few SME leathernecks who have experienced both an prefer the knife bearing and lower effective mass of the original 3012R.
12" Tonearms for TD-124
Finally having my TD-124 Mk ii
re-habbed as well as having a slate plinth made to accommodate both 9" and 12" arms. I'll be using my 3009 Series II and need to choose a 12" arm.
The 3009 will generally have MM carts mounted to it (V-15 iii, Jico MM-1, AT 155LC). For now, on the 12" arm I'm planning on using a DL-103r and eventually some type of Mono cart.
The Schick seems like a good choice mechanically and aesthetically so I'm currently leaning in this direction.
For some, either the SME 3012 or M2-12R might seem like an obvious choice. Have also considered the Jelco. No experience with any of the Ortofon arms.
Any insights or suggestions?
re-habbed as well as having a slate plinth made to accommodate both 9" and 12" arms. I'll be using my 3009 Series II and need to choose a 12" arm.
The 3009 will generally have MM carts mounted to it (V-15 iii, Jico MM-1, AT 155LC). For now, on the 12" arm I'm planning on using a DL-103r and eventually some type of Mono cart.
The Schick seems like a good choice mechanically and aesthetically so I'm currently leaning in this direction.
For some, either the SME 3012 or M2-12R might seem like an obvious choice. Have also considered the Jelco. No experience with any of the Ortofon arms.
Any insights or suggestions?
- ...
- 20 posts total
- 20 posts total