2. analog
  3. 119718-75218

No bass with new turntable?

 Hello, I've just set up a Pro-ject Carbon DC Esprit, dialed in the arm etc., and while the upper spectrum of the sound is great, there is just no bass, let's say below the 80-100hz range. It's been probably 30 years since I've fooled around with turntables so I can't remember if that's just the way it's supposed to be. Luckily I have a Velodyne SMS-1 bass management system to turn up what I'm missing, but without that I'd be completely disappointed. Using a CDP my speakers are very full of bass. I've played with the tone arm adjustments with no difference in bass really, all supplied cables hooked up and checked, the cart is an Ortofon Red, the phono preamp is integrated in the Rogue Audio Sphinx amp.
 Any suggestions/opinions?
wetfeet48
fleib
1,124 posts
 

Wetfeet48,

In your initial post you said you just set up the table and there is no bass. Inna has a point - initially there is not much bass. 

It does sound like you have the channels out of phase, even though you checked. This could occur with a mislabeled connector anywhere from the cart itself to the phono stage. To check for this condition reverse the wires on one channel and see if the bass comes in.  You can do this at the cart pins by switching the tags on the pins - either red/green or white/blue. 

Regards,

geoffkait's avatar
geoffkait
23,365 posts
 
It's also possible to have an out of phase condition somewhere else down the line.  It's even possible some new component reverses polarity, who knows?
czarivey
5,946 posts
 
Price tag might be part of problem that often manufacturers are negligent to the quality of assembly and set-up.
Simple solution money back or fix the way it should sound as documented and confirmed.

ghosthouse's avatar
ghosthouse
4,312 posts
 
Wetfeet - What are the chances of trying another cart and seeing if bass response improves? Am thinking to borrow something or buy an inexpensive cart like a Grado Black or a Shure.  Yes, kind of a pain redoing the set up but could eliminate a lot of guessing and angst.  Good luck.  
stringreen's avatar
stringreen
6,470 posts
 
What I question is your evaluation of the bass. Could it be that the last cartridge had a plethora of bass, and this one is more even handed?? Also, you might try sitting the new turntable on a different shelf/table/etc. I don’t think that its the turntable setup. I had an Ortofon that was internally wired wrong...perhaps that same person wired yours. I sent mine back and got a brand new one ...no questions asked....works perfectly now.
More to discover