Check with Andy at Vintage Tube Services
Help returning an Allnic H1500 SE II phono stage
Looking for some feedback and recommendations for retubing my Allnic H1500 SE II phono stage that are getting long on service hours and besides like to have a full set of tubes on hand for any piece of tube gear I have in play for trouble shooting issues as they come up. The tubes in question are not readily available through the normal channel's like Upscale Audio or The Tube Store except for the rectifier tube that has been replaced with a Phillips 5R4GYS with great sonic success. The list of tubes needed are as follows, (2) E282F, (2) 7233, (2) 6485, (6) 5842. I have found them all on eBay from different sellers but not confident that is the way to go. Any help or advice will be appreciated.
- ...
- 10 posts total
Contact David Beetles of Hammerrtone Audio, he is the global distributor for Allnic. He’s a great guy and very knowledgeable. [url]http://www.hammertoneaudio.com/[/url] |
What were the tubes used in this model originally purposed for? My recollection was that the E810F in the H3000 was meant for telephony switching, and was not originally intended for audio, which is why it's an offbeat tube- not expensive, but not usually carried by the usual audio suppliers of NOS (though who knows what they have accumulated). wrm57 is correct as to my knowledge, David is retired, Albert's your man. (David was great to work with, but you have to appreciate Albert's sense of humor- a wonderful character). |
- 10 posts total