Audio Desk Systeme RCM - what's been your experience?

@dgarretson 
@rushton 
Thanks, both. That thread on DIY is about 230 pages long now! I've been slowly working my way through it, and have been doing a little additional research and inquiry on the side. My interest is less about cost cutting and more about improving results: a set up that allows the higher frequencies, permits the use of some sort of surfactant, is robust, takes heat into account and can address filtration of contaminants in the bath between cycles. I  can do a reagent water rinse and dry on the Monks, rather than forced air. I'm not so concerned about stacking multiple records for one cleaning cycle. I'll take a look at the VPI board as well. 
regards,
bill hart

@whart
Bill, I’ve waded through the entire diyAudio thread (it is a monster!) and also another large thread on Audio Kharma about the chemistry of the various solutions we use for cleaning. Until some of the trolls at Audio Kharma ran him off in utter frustration, a chemist (guest110) who is also an audiophile and vinyl lover, was posting answers to all sorts of questions about differing solutions for cleaning vinyl.
http://audiokarma.org/forums/index.php?threads/record-cleaning-youre-doing-it-wrong.689430/

The bottom line I came away with is: Tertigol (a detergent and surfacant) or Triton X-100 is a good way to go. BUT in very diluted amounts - less is generally better. And rinsing with Reagent grade water, then vacuuming dry, is also an excellent practice.

I’ve concluded to pursue the following set up for my ultrasonic cleaning:

Trusonik 10L - a 40khz 10-liter ultrasonic tank that seems well built and has been used for several years in the Ultrasonic V-8 setup
VinylStack Sonic Spin, with four-LP 1" spacers (because I have the larger tank)
In-line water filter for in-between-batch filtering, using bbftx’s design
Tertigol S-15-3 and S-15-9 (50-50 combination) from TALAS

I’ll use my VPI HW-17 for the rinse and vac.

I’m certainly no expert in any of this. I’m heading down an experimental path myself. But, for what it may be worth, this is what I’ve decided to try after a lot of reading and discussions elsewhere.

Best wishes in your journey! Tell us what you decide to do.

Rushton

This is great. Let's stay in the loop on this. BTW, that DIY thread is 'only' 145 pages. Many thanks again, Rushton, and to DGarretson for raising the topic of DIY in this context. 

All this makes me glad I own a Loricraft PRC-4 - - - 10 years of ownership and no problems.

@rshak 
Absolutely agree with you! The Loricraft is superb. But I have over 6,000 LPs I need to clean and my 4-step cleaning process on my trusty VPI is just not allowing me to get as many cleaned as I need to accomplish. I've been listening without cleaning because otherwise I'd not be listening - not cleaning is not a good choice. LOL.