Audiophile recording and playback - Tascam DA-3000



Hi, some months ago I bought the Tascam DA-3000 recorder, having used a small Korg MR-1 for some years. I mainly record from my vinyl rig (Lyra Atlas – SME V – Hanss T30 – Aesthetix Io Eclipse – Einstein The Tube mk2).

I have found that even with the hassle of very big files (one LP = almost 3 GB), the dual speed DSD sound is superior to anything digital I have heard so far.

In my rig, analog blows digital out of the water, but this is the best candidate.

In a former thread, someone asked, is the Da-3000 ‘audiophile’ level. The answer is a clear yes.

This is the first digital recorder I have owned (after some DATs and others) that does not make me ashamed that my old analog and much-modded Revox A77 stands in my loft. Also, for some, the Tascam may be a good investment since its DAC may outperform the DAC you already have. I had a Stello DAC that went out the door.

However, some aspects of the Tascam are problematic, and others can probably be improved.

A first issue is connectivity and ease of use. It would be great if the Tascam could record to a hard disk, or at least play back from it. The manual says a hard disk can be connected through the USB port. I bought a Seagate Wireless Plus 1 TB hard disk to try. However, the Tascam won’t recognize it, even when I reformatted to Exfat (instead of NFTS). Perhaps it would be recognized if I reformatted to FAT32, but then I would not have any use of a big hard disk, the limit is 32 GB I think. So I am back to recording to my 32 GB Sandisk SD card, eight LPs or so, with hand written notes, what track is what title, and then carrying the card and paper to my main PC, naming folders and transferring the files. BTW this was very slow, 19 mbps, since my card reader was not USB 3 compliant, I changed, and now it is much better, 84 or so mbps.

The ideal would be to have the Tascam drive as a unit on my home network, this is why I bought the Seagate wireless, but as stated - no success so far.

Experiences with the Tascam (or similar), in this and other respects, are welcome.

Note that, the problems so far are minor, for me, compared to the benefits. The sound is usually much better than what I get from CDs or the web (excepting some SACDs). I can bring my analog rig around, so to speak, playing back on the Korg Mr-1 (or the Tascam itself, which is light weight and semi-movable). I think that DSD playback will become more easily available in the future. If Pono had included DSD, I would have bought one.
Ag insider logo xs@2xo_holter
Just picked up a used Decware modded version of the DA3000. Jury is still out but I do like what I'm hearing. I like the NOS Dacs, but this unit with upsampling and Decware output stage takes this unit to a completely new level! Steve provides a sample card recorded in DSD which is exceptional and rivals many of the best stock/modded Dacs I have listened to over the last many years!

Chris 

If you want to take the DA-3000 further and can justify $900, synchronize its clock input to an external oven-controlled clock. To record at DSD128 I connect it to an Antelope LiveClock at 44.1kHz. This significantly improves both ADC and DAC sections of the Tascam. The LiveClock has a 12-18Vdc power port that can be upgraded with a good linear power supply as an alternative to the stock wall wart. The LiveClock can also be synchronized to an 10mHz master atomic clock. This may seem like overkill, but with this set-up DSD128 recordings played back through my Esoteric K-01X get very close to the LP. It’s been rather astonishing to "listen to" a clock with at least 50x more precision than the Tascam’s internal clock.

I thought about but didn’t pop for the Decware mods, as it appears that Decware does nothing to improve the ADC section.

dgarretson,

If I use the DA 3000 for playback only (SD Cards, SPDIF Input)

1) Does the Live Clock improve the sound?

2) How would I install (which connections to use) the Live Clock to benefit SD card/SPDIF playback?

TIA

Chris

The Tascam has a Word Clock Sync 75ohm BNC input for connection to an external master clock, and a setting on the screen menu to switch from internal to external master clock. A higher precision master clock will improve both recording and playback of SD files, and also conventional DAC operation from the SPDIF input.

It’s a significant improvement: more detail, more accurate pitch and timbre, tighter LF, bigger soundstage, livelier dynamics, calmer background. Of course the old recordings that you made with the internal clock won’t sound as good as new ones.