Tekton Double Impacts


Anybody out there heard these??

I have dedicated audio room 14.5x20.5x9 ft.  Currently have Marantz Reference CD/Intergrated paired to Magnepan 1.7's with REL T-7 subs.  For the vast majority of music I love this system.  The only nit pick is that it is lacking/limited in covering say below 35 hz or so.  For the first time actually buzzed the panel with an organ sacd. Bummer.  Thought of upgrading subs to rythmicks but then I will need to high pass the 1.7's.  Really don't want to deal with that approach.

Enter the Double Impacts.  Many interesting things here.  Would certainly have a different set of strengths here.  Dynamics, claimed bottom octave coverage in one package, suspect a good match to current electronics.

I've read all the threads here so we do not need to rehash that.  Just wondering if others out there have FIRST HAND experience with these or other Tekton speakers

Thanks.
corelli
@david_ten - Yes, I recall you mentioning getting the front end in place, and all of that worked out first. I hope that's following a good path and things are working out! As far as the options for an SE amplifier, the 845/211 is definitely going to have more power and slam over a 2A3, and arguably more SET tone than the KT88 in my Transcend SE, but also requires a much more robust parts list to get it to work. The chokes and transformers need to be able to handle 1,000 volts continuously for the 845/211, and it also requires double the capacitance, and many series parts in the power supply to handle those voltages (most caps, chokes, transformers, etc. rate a maximum voltage of 500-600 volts). So the build of an 845/211 amplifier is almost double the cost. That said, I believe the KT88 in the Transcend sits right in between a 2A3's midrange and an 845's power- and won't break the bank. The 150's are a quite a bit brighter and larger sounding than the 88's in this amp, but don't quite have the midrange lushness of the 88's. Aric
@aricaudio - When using the KT-88s in ultralinear mode, are you getting similar slam with the heavier music? I know you’re getting less wattage, still, with DIs, I don’t imagine 9 or 10w is going to be a problem driving the DIs in my 12x13x8 room.

Nick
@evolvist  You do get more power in Ultra-Linear mode- which does suit heavier music a bit more, but I find the enjoyment of the music (be it soft strings or heavier music) to be more so in Triode-mode. The drop in power is much less noticeable than one would think- in some cases, it's not apparent at all. Aric
Aric,
I sure agree with your  comments on triode compared to ultralinear mode. Although a 300b SET is my main amplifier I also have 2 PP tube amplifiers.  One is el 34 and the other is 6550/KT 88 and both are switchable between the two modes of operation.  At least for my listening preferences the Triode mode is just better sounding . Totally subjective I acknowledge. 
Charles