2. amps-preamps
  3. 132245-34152

Aragon 8008x5 with Vandersteen 2w

Hello everyone, 
     I know this is a long shot but is anyone using the above combination. I am attempting to find the correct balanced crossover. I have 20K RCA, 150K balanced, these do not sound good. I do have the WX2 box but believe it is defective. I have downloaded the Vandertones and am using a multi-meter to check AC voltage at the speaker. None of that matters if I do not have various capacitors to try. 

So.... since I do not know the correct input impedance for this amp, does anyone have one they are using successfully with a 2w series sub-woofer?

PS, the advertised spec I found for the amplifier is 22K single ended. The 20K single ended crossover does not sound or measure correctly. I believe the impedance for the 8008x5 may be different from an 8008. Speakers are Vandersteen 2ci.

Thanks in advance!       
jwmorris
jwmorris OP
45 posts
 
Thanks for the replies everyone! I do believe I am performing the procedure correctly. I have used the sub-woofer with 2 other amplifiers with no problems.  
jwmorris OP
45 posts
 
I just spoke with Richard on the phone. He believes the problem with the using the 2w with the Aragon balanced circuit may be in the design of the amplifier. He suggest that I attempt to get the combination running using single ended connections. 

   
csmgolf
877 posts
 
Don't forget to use the xlr shorting pins for the channels that will be used with rca output.
jwmorris OP
45 posts
 
Yes, I am using the shorting pins. Thank you!
gdnrbob
4,421 posts
 
OP, have you corrected the problem?
B
More to discover