Which amp is best to drive Magneplanar 1.6's?

I am using a Luxman M-05 at 105 w/ch class A power. I dont need a subwoofer. I agree with the plinius user. Good class A power at 100 w/ch or more will rock your world !

Hello,

A friend of mine have 1.6's which we tried with my Threshold s500, and it did have good synergy with the maggies....

regards,

any high current amp is going to sound good with maggies

what about the arcam solo move 2.1? 50 watts per channel in a medium room? Any advice would be greatly appreciated. I am currently using bryston b60 with no issues. My other option is to keep the bryston and add an OPPO dvd player. However, I really liked the idea of the arcam all in one system.

Using a DVM which I know is not the best method, I've never measured more than about 8vac at my speaker terminals. Give it 20% bump for latency and you've got 10vac.....at the peaks. That works out to what.....about 20 watts at 2.2 amps? That is using 4.5 ohms in the calculation.
Double up and add a fudge factor and you've got 50 a side. Double again, JUST to be SURE and 100 a side should 'bout do it.
My amp? ASP500 modules in a PSAudio integrated. 80vdc rail and a claimed 45 amps. One day i'll 'redline' it and see if I can even stand 20 or 25 vac at the speaker terminals. That's gonna be LOUD.

As for sub, I run my panels full range with the cross set for about 35hz. No midbass bloom or wrong sounding 'thump'. I don't change anything between music OR movies.

Also, my panels are 'backwards' Maggies come setup to have the mylar side face the listener and the tweeters on the outer side. I just rotated them in place, putting the pole pieces facing the listener while the tweeters are now 'IN'. This made a dramatic change for the better. Try it and see. You may agree. Years ago, Magnepan CAME the way I now have it and I haven't heard a good reason for the change.