ja_zz 1m
What exactly do you mean by "a real preamp without ICs in the path"?In this context, IC = integrated circuit.
Shahinian Obelisk vs VandersteenTreo
ja_zz 1m What exactly do you mean by "a real preamp without ICs in the path"?In this context, IC = integrated circuit. |
I, too, am a bit confused by Johnny's post. @ja_zz Yes, you need the spikes/cones installed on the speakers. Didn't yours come with a set? They disconnect the speaker from the floor and help with clarity/imaging. Tilt back, too, is necessary for proper imaging, soundstage, getting the tweeters at the right height. If you don't have a set, contact Johnny. You could also get some threaded gliders from Herbie's. http://herbiesaudiolab.net/spkrfeet.htm#stud B |
Jazz nothing wrong w you PRE amp The fact you are commenting about how anything sounds without doing the proper set up protocols is very confusing to your audience and yorself and that would in return give you half assed results you need to read the owners manual and get the spikes , spacers and parts to experience what you paid for JohnnyR |
Johnny R is right....take the time to go thru the setup per the manual and it is downloadable along with Vandertones via the Vandersteen website must get the Radio Shack analog SPL meter to set the bass EQ you will be shocked at how bumpy your room - any room is without fixing it... finally get the eq controls centered as previous owner probably set them to room.. |