Shahinian Obelisk vs VandersteenTreo

Gentlemen,
Can you please measure the distance between the floor and 1. back and 2. front bottom parts of the speaker: I am trying to determine the length of spikes and cones. What is the difference between front and Back, how much are they tilted in your case?
Thanks!

You mentioned that there was only wood in the place where the threads should go.
I just realized that the previous owner may have removed the metal threaded inserts-Why, I don't know. 
If this is the case, then you need to replace them in order to mount the spikes.
Check out this link:
https://www.amazon.com/Dayton-Audio-DSS2-BC-Chrome-Speaker/dp/B003BFWQIU/ref=sr_1_3?ie=UTF8&qid=...
You need those things on the left. Or, maybe some T-Nuts:
https://www.amazon.com/binifiMux-Pronged-Assortment-Carbon-T-Nuts/dp/B076VL9RM5/ref=sr_1_14?ie=UTF8&...
Hopefully, the previous owner didn't enlarge the holes too much.
With Wood filler and Wood Glue, you should be able to install them without much difficulty.
B

@ja_zz 
I just got your pics and I think I am correct. There should be a threaded insert inside the cabinet.
It looks like the numbnuts previous owner over-tightened the spikes and when he removed them, he took out the inserts as well. No wonder why he 'lost' them.
As I said, you need T nuts, better yet, call Johnny Rutan (send him the pics you sent me) or Mr. V. directly and I bet they will have the proper parts  to fix it.
Can you do it yourself, sure.
BUT, why risk more problems? And, it looks like he broke off some of the bottom of the speaker where they attach.
B

Bob,
I broke it a bit myself. I thought there were metal inserts and screwed the cones in without looking. My bad.
However, rest of the thread is fine. 
And I can make the inserts if they are flat and fit into those depressions on the bottom.
I will also request Richard for those spares.
Can you guys please measure the gaps between the speaker bottom in front and back of the speakers and the floor? Thanks!

Can you guys please measure the gaps between the speaker bottom in front and back of the speakers and the floor? Thanks!

You don't need this.
If/when you put in the threaded inserts, you will thread your spike stud into it. Then, depending upon your floor, you will adjust each spike to give you the proper tilt(as per the Vandy manual), then tighten the jam nut to secure.

However, rest of the thread is fine.

There is no thread in there. Hence the need for threaded inserts.
B